Military Institute of Science and Technology (MIST)

Dr Md. Enamul Hoque, Ph.D

Professor, Department of Biomedical Engineering (BME)

CONTACT INFORMATION/ OFFICE LOCATION

Room: 3^rd Floor, Tower-4, MIST.

Mirpur Cantonment, Dhaka-1216, Bangladesh.

ACADEMIC QUALIFICATIONS

PGCHE (Post Graduate Certificate in Higher Education), University of Nottingham. (25 July 2015)
PhD (Division of Biomaterials/Biomedical Engineering, Department of Mechanical Engineering), National University of Singapore (NUS), Singapore. (07 December 2007)
M.Eng. (Division of Biomaterials/Biomedical Engineering, Department of Mechanical Engineering) National University of Singapore (NUS), Singapore. (14 April 2003)
B. Sc. Eng. (Materials & Metallurgical Engineering), Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh (September 1998)

PROFESSIONAL FELLOWSHIP/ MEMBERSHIP

C.Eng. (Chartered Engineer) Equivalent to P.Eng. (Professional Engineer), Certified by Engineering Council, UK; Since 24 August 2015
Fellow, Higher Education Academy, UK; Since 09 June 2015
Fellow, Institute of Mechanical Engineering (IMechE), UK; Since 24 August 2015
Member, Royal Society of Chemistry, UK; Since 26 June 2020
Member, Institute of Materials, Minerals and Mining (IOM3), UK, Since 01 June 2014
Member, Tissue Engineering and Regenerative Medicine International Society (TERMIS), USA; Since 01 June 2005
Member, World Academy of Science, Engineering and Technology; Since 18 July 2018
Member, Institute for Engineering Research and Publication (IFERP); Since 09 April 2020
Member, Malaysian Tissue Engineering and Regenerative Medicine Society (MTERMS), Malaysia; Since 01 Jan 2008
Member, Institute of Materials Malaysia (IMM), Malaysia; Since 01 June 2014

AWARDS/ HONORS

Excellent Researcher Recognition, Military Institute of Science and Technology (MIST), Dhaka, Bangladesh
03 Feb 2022
Outstanding Nano-scientist Award, International Workshop on Recent Advances in Nanotechnology and Applications (RANA-2018), AMET University, Chennai, India
7 - 8 September 2018
Best Lecturer, University of Nottingham Malaysia Campus
15 December 2011
Best Poster Award (03), Postgraduate Research Showcase, University of Nottingham Malaysia Campus, Malaysia
7-8 September 2018
Judge for Scientific Session/Competition (06), International workshop on Recent Advances in Nanotechnology and Applications (RANA-2018), AMET University, Chennai, India
08-10 February 2023
Scientific Session Chair (08), 7th Annual World Congress of Smart Materials-2023, Sapporo, Japan
30 November 2022, London (UK) to 01 December 2022 Tokyo (Japan)
Invited Speaker (18), International Pathogens Research eConference (Pathogens-eCon2022)
08-10 February 2023
Keynote Speaker (05), 7th Annual World Congress of Smart Materials-2023, Sapporo, Japan
7 - 9 October 2013
Plenary Speaker, 2nd International Conference & Exhibition on Materials Science & Engineering (Materials Science - 2013), Las Vegas, USA.
27th April 2011
3rd Poster Award, Research Poster Competition, University of Nottingham, UK
27th April 2011
2nd Poster Award, Research Presentation and Competition, University of Nottingham Malaysia Campus
23 Sept 2014

Academic Scholarships:

PhD Research Scholarship, National University of Singapore (NUS), Singapore

1989-1991
Merit Scholarship, Bangladesh Education Board, Bangladesh.
1994-1998
Undergraduate Technical Scholarship and Dean’s List Award, Bangladesh University of Engineering & Technology (BUET), Bangladesh.
2000-2002
M. Eng. Research Scholarship, National University of Singapore (NUS), Singapore.
2003-2006

Research Grants Received (Total Approx. USD 337,000):

Science and Technology Fund 2021, Ministry of Science and Technology, Bangladesh 2021. Project Title: Development of a CNT Integrated r-PET electrospun antibacterial/anti-viral respirator mask to combat COVID-19 Allocated Amount: Tk 400,000 (Four Lac Taka)
Ministry of Health and Family Welfare, Bangladesh 2021. Project Title: Therapeutic effects of pulsed electromagnetic field (PEMF) in diabetic neuropathy (Under Review) Amount Applied For: Tk 1,26,10,000 (One Core Twenty Six Lacs and Ten Thousand Taka)
Military Institute of Science and Technology (MIST) Research & Development Fund 2018. Project Title: Development of a biomedically vibrant and economically viable composite bone plate. Allocated Amount: BDT ~ 650,000
Military Institute of Science and Technology (MIST) Research & Development Fund 2018. Project Title: Design and Development of an Advanced Device for the Measurement of Hemoglobin by Non-invasive Method. Allocated Amount: BDT ~ 50,000
Military Institute of Science and Technology (MIST) Research & Development Fund 2018. Project Title: Design and Development of a Multi-Channel Prosthetic Hand for Amputees. Allocated Amount: BDT ~ 50,000
Exploratory Research Grant Scheme in 2013 (ERGS 2013; Malaysian Government Research Grant) Project Title: Synthesis and Characterization of Graphene-Magnetite Hybrids and Their Polymer Nanocomposites. Allocated Amount: MYR ~ 102,000
Fundamental Research Grant Scheme in 2013, (FRGS2 2013; Malaysian Government Research Grant); Project Title: First Principal Modelling of the Fundamental Electronic Properties of Graphene Nanoflake Materials. Allocated Amount: MYR ~ 58,600
Exploratory Research Grant Scheme in 2013 (ERGS 2013; Malaysian Government Research Grant). Project Title: Exploration and characterization of kenaf fiber-based composites for prosthetic leg socket fabrication. Allocated Amount: MYR ~ 100,000
Dean’s Undergraduate Research Scheme 2013 (DURS 2013; Nottingham University Research Grant); Project Title: Development and degradation characterization of bioresorbable glass fibre polymer composites. Allocated Amount: MYR ~ 30,000
Exploratory Research Grant Scheme in 2012, ERGS 2012 (Malaysian Government Research Grant); Project Title: Electrospun Nanofibre Matrix for Wound Healing and Antibacterial Activity - Development and In vitro Evaluation. Allocated Amount: MYR ~ 50,000
Malaysia Inter Doctorate Award Scheme, MIDAS Grant (Nottingham University Intercampus PhD Research Grant) in 2009; Project Title - Characterization and failure analysis of in-situ bone substitute materials. Allocated Amount: Full Stipend (Estimated to be MYR ~ 200,000)
Faculty Research Assistant Grant in 2008 (Nottingham University Research Grant). Project Title - Design and fabrication of tissue engineering scaffolds incorporating rapid prototyping (RP) technology and synthetic biopolymers – Towards the development of a scaffold library. Allocated Amount: Full Stipend (Estimated to be MYR ~ 200,000)

PROFESSIONAL/ WORK EXPERIENCE

Professor, Department of Biomedical Engineering, Faculty of Engineering, Military Institute of Science and Technology (MIST)

Duration: 01 January 2018 – To Date

Associate Professor and Head of Department, Department of Biomedical Engineering, College of Engineering King Faisal University, Saudi Arabia

Duration: 08 Sept 2015 – 15 Sept 2017

Associate Professor and Head of Bioengineering Division, Department of Mechanical, Materials & Manufacturing Engineering; University of Nottingham (UK, China, Malaysia) Malaysia Campus

Duration: 01 January 2011 – 31 August 2015

Assistant Professor, Department of Mechanical, Materials & Manufacturing Engineering; University of Nottingham (UK, China, Malaysia) Malaysia Campus

Duration: 29 August 2007 – 31 December 2010

Research Scholar, Division of Bioengineering, Department of Mechanical Engineering; National University of Singapore (NUS), Singapore

Duration: 05 May 2000 – 31 July 2007

Teaching Assistant, Department of Materials and Metallurgical Engineering; Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh

Duration: 01 March 1999 – 30 April 2000

Administrative Roles:

Chairman, Accreditation Board, Department of Biomedical Engineering, Faculty of Engineering, Military Institute of Science and Technology (MIST), Bangladesh: January 2020 – To date
President, Board of Scholarship Policy, Military Institute of Science and Technology (MIST), Bangladesh: November 2021 – To date
President, Syllabus Review Board, Department of Biomedical Engineering, Faculty of Engineering, Military Institute of Science and Technology (MIST), Bangladesh: January 2020 – To date
Member, Board of Research Policy, Military Institute of Science and Technology (MIST), Bangladesh: November 2021 – To date
Member, Faculty Recruitment Committee, Department of Biomedical Engineering, Faculty of Engineering, Military Institute of Science and Technology (MIST), Bangladesh: January 2018 – To date
Member, Postgraduate Admission Committee, Department of Biomedical Engineering, Faculty of Engineering, Military Institute of Science and Technology (MIST), Bangladesh: January 2018 – To date
Head of Department, Department of Biomedical Engineering, King Faisal University, Kingdom of Saudi Arabia: January 2016 – December 2016

TECHNICAL SKILLS

Trained on the Following Equipment:

Confocal Laser Microscope (CLM)
Differential Scanning Calorimeter (DSC)
Fine Sputter Coater (JFC-1200)
Freeze Dryer
Light Microscope
Mercury Porosimeter1
Microplate Reader
Modern Microbraiding Machine
Scanning Electron Microscope (SEM)
Universal Testing Machine
Ultra Gas Pycnometer
Water Contact Angle Measurement

PUBLICATIONS

Journal Papers (Total 139; 118 Published + 21 Under Review):

Rahatuzzaman, M., Mahmud, M., Rahman, S., & Hoque, M. E. (2024). Design, fabrication, and characterization of 3D-printed ABS and PLA scaffolds potentially for tissue engineering. Results in Engineering, 21, 101685. https://doi.org/10.1016/j.rineng.2023.101685
Rashid, A.B.; Hoque, M.E.; Kabir, N.; Rifat, F.F.; Ishrak, H.; Alqahtani, A.; Chowdhury, M.E.H. Synthesis, Properties, Applications, and Future Prospective of Cellulose Nanocrystals. Polymers 2023, 15, 4070. https://doi.org/10.3390/polym15204070
Alam MR, Shahid MA, Alimuzzaman S, Hasan MM, Hoque ME. Electrospun bio-nano hybrid scaffold from collagen, Nigella sativa, and chitosan for skin tissue engineering application. Journal of Bioactive and Compatible Polymers. 2023;38(3):234-251. doi:10.1177/08839115231162365
Hoque, M. E., Hossain, M. S., Mim, I. Z., & Chowdhury, J. I. (2023). Electroconductivity of Bacterial Cellulose and Bacterial Cellulose-Based Nanocomposites: Varieties, Processing and Applications. Kepes, 21(2), 287–317. https://doi.org/10.5281/zenodo.7936583-65
Bin Rashid, A., Uddin, A.S.M.N., Azrin, F.A., Saad, K.S.K. and Hoque, M.E. (2023), 3D bioprinting in the era of 4th industrial revolution – insights, advanced applications, and future prospects, Rapid Prototyping Journal, Vol. 29 No. 8, pp. 1620-1639. https://doi.org/10.1108/RPJ-02-2023-0041
Md Enamul Hoque, Sadia Mannan Shanta, Rhythem Tahrin, Saem Chowdhury, Zarin Tasnim, Md Abdul Alim Shuvo, Shifat Al Hasnayeen Riham, A benign way of measuring hemoglobin in blood – Towards developing a non-invasive technique, Hybrid Advances, Volume 3, 2023, 100039, https://doi.org/10.1016/j.hybadv.2023.100039.
Adib Bin Rashid, Abu Saleh Md. Nakib Uddin, Fahima Akter Azrin, Khondokar Safin Kaosar Saad, Md Enamul Hoque. 3D Bioprinting in the era of 4th Industrial Revolution – Insights, Advanced Applications, and Future Prospects. Rapid Prototyping Journal (Accepted on 04 April 2023).
Md Rubel Alam, Md Abdus Shahid, Shah Alimuzzaman, Md Mehedi Hasan, Md Enamul Hoque. Electrospun bio-nano hybrid scaffold from collagen, Nigella sativa, and chitosan for skin tissue engineering application. Journal of Bioactive and Compatible Polymers. Published on March 30, 2023; https://doi.org/10.1177/08839115231162365
Adib Bin Rashid, Nazmir-Nur Showva, Md Enamul Hoque. Gelatin-based scaffolds: An intuitive support structure for regenerative therapy. Current Opinion in Biomedical Engineering. Current Opinion in Biomedical Engineering, 2023, 26, 100452; https://doi.org/10.1016/j.cobme.2023.100452
Shashank Shekhar, Md Enamul Hoque, Pramendra Kumar Bajpai, Habibul Islam & Bhasha Sharma. Chemical upcycling of plastics as a solution to the plastic trash problem for an ideal, circular polymer economy and energy recovery. Environment, Development and Sustainability, 2023 DOI: https://doi.org/10.1007/s10668-023-03003-8
Md Zillur Rahman, Maliha Rahman, Tariq Mahbub, Md Ashiquzzaman, Suresh Sagadevan, Md Enamul Hoque. Advanced biopolymers for automobile and aviation engineering applications. Journal of Polymer Research, 2023, 30, 106. DOI: https://doi.org/10.1007/s10965-023-03440-z
Faris AL-Oqla, Md Enamul Hoque. Structural Integrity and Performance of a Novel Chemically Treated Cellulosic Paper Corn / Polyester Sustainable Biocomposites. Functional Composites and Structures. DOI: 10.1088/2631-6331/acbf20.
Adib Bin Rashid, Shariful Islam Shishir, Md. Azim Mahfuz, Md. Tanvir Hossain, Md Enamul Hoque. Silica Aerogel: Synthesis, Characterization, Applications, and Recent Advancements. Particle and Particle Systems Characterization. Published on 09 February 2023; https://doi.org/10.1002/ppsc.202200186
Md. Rubel Alam, Shah Alimuzzaman, Md. Abdus Shahid, Fahmida-E-Karim, Md Enamul Hoque. Collagen/Nigella sativa/chitosan inscribed electrospun hybrid bio-nanocomposites for skin tissue engineering. Journal of Biomaterials Science, Polymer Edition, 2023, 16, 1-22 DOI: 10.1080/09205063.2023.2170139
Md Enamul Hoque, Shifat Al Hasnayeen Riham and Md. Abdul Alim Shuvo. A cost-effective prosthetic leg: Design and development. Hybrid Advances, 2023, Volume 2, 100017; https://doi.org/10.1016/j.hybadv.2022.100017
Siankwilimba, E., Mumba, C., Hang’ombe, B.M., Munkombwe, J., Mumford, J.H., Dzvimbo, M.A. Hoque, M.E. Bioecosystems towards sustainable agricultural extension delivery: effects of various factors. Environ Dev Sustain (2023). https://doi.org/10.1007/s10668-023-03555-9
Huaizhong Xu, Shinichi Yagi, Sherry Ashour, Lei Du, Md Enamul Hoque, and Lin Tan. A Review on Current Nanofiber Technologies: Electrospinning, Centrifugal Spinning, and Electro-Centrifugal Spinning. Macromolecular Materials and Engineering. Published on 26 October 2022 https://doi.org/10.1002/mame.202200502
Md Enamul Hoque, Nazmir-Nur Showva, Mansura Ahmed, Adib Bin Rashid, Sarder Elius Sadique, Tarek El-Bialy, Huaizhong Xu. Titanium and Titanium Alloys in Dentistry: Current Trends, Recent Developments, and Future Prospects. Heliyon, 2022, 8(11), e11300; https://doi.org/10.1016/j.heliyon.2022.e11300
Rahman S.M.A, Salah Issa, Mamdouh El Haj Assad, Sheikh Khaleduzzaman Shah, Mohammad Ali Abdelkareem, M. Enamul Hoque, A.G. Olabi. Performance enhancement and life cycle analysis of a novel solar HVAC system using underground water and energy recovery technique. Thermal Science and Engineering Progress, 2022, 36, 101515; https://doi.org/10.1016/j.tsep.2022.101515
Balaji Ayyanar Chinnapan, Marimuthu Krishnaswamy, Huaizhong Xu,
Md Enamul Hoque. Electrospinning of Biomedical Nanofibers/Nanomembranes: Effects of Process Parameters. Polymers, 2022, 14(18), 3719; https://doi.org/10.3390/polym14183719
AL-Oqla, F.M., Alaaeddin, M.H., Hoque, M.E., Thakur, V.K. Biopolymers and Biomimetic Materials in Medical and Electronic-Related Applications for Environment–Health–Development Nexus: Systematic Review. Journal of Bionic Engineering (2022). https://doi.org/10.1007/s42235-022-00240-x
Sankar Rajan, K. Marimuthu, C. Balaji Ayyanar, Md Enamul Hoque. Development and in-vitro characterization of HAP blended PVA/PEG bio-membrane. Journal of Materials Research and Technology. Journal of Materials Research and Technology, 18, 4956-4964, 2022. https://doi.org/10.1016/j.jmrt.2022.04.130
Md Zillur Rahman, Md Enamul Hoque, Md Rubel Alam, Md Abdur Rouf, Saiful Islam Khan, Huaizhong Xu, and Seeram Ramakrishna. Face Masks to Combat Coronavirus (COVID-19)—Processing, Roles, Requirements, Efficacy, Risk and Sustainability, Polymers, 14(7), 1296, 2022. doi: 10.3390/polym14071296
Balaji Ayyanar Chinnappan, Marimuthu Krishnaswamy, Mugilan Thanigachalam, Huaizhong Xu, Saiful Islam Khan, Md Enamul Hoque. Fabrication, Characterization and In Vitro Assessment of
Laevistrombus canarium-Derived Hydroxyapatite Particulate-Filled Polymer Composite for Implant Applications, Polymers 14 (5), 872, 2022. https://doi.org/10.3390/polym14050872
Enock Siankwilimba, Jacqueline Hiddlestone-Mumford, Bernard Hang’ombe Mudenda, Chisoni Mumba, Md Enamul Hoque. COVID-19 and the Sustainability of Agricultural
Extension Models. International Journal of Applied Chemical and Biological Sciences, 3(1), 1-20, 2022. https://identifier.visnav.in/1.0001/ijacbs-21l-05003/
Tamrin Nuge, Xiaoling Liu, Kim Yeow Tshai, Siew Shee Lim, Norshariza Nordin, Md Enamul Hoque, Ziqian Liu. Accelerated wound closure: Systematic evaluation of cellulose acetate effects on biologically active molecules release from amniotic fluid stem cells. Biotechnology and Applied Biochemistry, 69(3), 906-919, 2022; https://doi.org/10.1002/bab.2162
Tawsifur Rahman, Amith Khandakar, Md Enamul Hoque, Nabil Ibtehaz, Saad Bin Kashem, Reehum
Masud, Lutfunnahar Shampa, Mohammad Mehedi Hasan, Mohammad T. Islam, Somaya Al-Madeed, Susu M. Zughaier, Saif Badran, Suhail A. R. Doi,Muhammad E. H. Chowdhury. Development and Validation of an Early Scoring System for Prediction of Disease Severity in COVID-19 Using Complete Blood Count Parameters. IEEE Access, 9, 120422, Published 16 Aug 2021. DOI: 10.1109/ACCESS.2021.3105321.
Biswas, M.C., Jony, B., Nandy, P.K., Chowdhury, R.A., Halder, S., Kumar, D., Ramakrishna, S., Hassan, M., Ahsan, M.A., Hoque, M.E., Imam, M.A. Recent Advancement of Biopolymers and Their Potential Biomedical Applications. J Polym Environ (2021). Published 13 June 2021. https://doi.org/10.1007/s10924-021-02199-y
J Anita Lett, Suresh Sagadevan, Is Fatimah, Md Enamul Hoque, Yogeswaran Lokanathan, Estelle Léonard, Solhe F Alshahateet, Romana Schirhagl, Won Chun Oh. Recent advances in natural polymer-based hydroxyapatite scaffolds: Properties and applications. European Polymer Journal, 148, 110360, 2021. https://doi.org/10.1016/j.eurpolymj.2021.110360.
Tamrin Nuge, Ziqian Liu, Xiaoling Liu, Bee Chin Ang, Andri Andriyana, Hendrik Simon Cornelis Metselaar, Md Enamul Hoque. Recent advances in scaffolding from natural-based polymers for
volumetric muscle injury. Molecules, 26(3), 699, 2021. https://doi.org/10.3390/molecules26030699.
Md Enamul Hoque, Asif Mahmud Rayhan, Samira Islam Shaily. Natural Fiber-Based Green Composites: Processing, Properties and Biomedical Applications. Applied Science and Engineering Progress, 2021. DOI: 10.14416/j.asep.2021.09.005.
Shek Rahman, Hegazy Rezk, Mohammad Ali Abdelkareem, Md Enamul Hoque,
Tariq Mahbub, Sheikh Shah, Ahmed M. Nassef. Predicting Drying Performance of Osmotically Treated Heat Sensitive Products Using Artificial Intelligence. CMC-Computers, Materials & Continua 67(3), 3143-3160, 2021. doi:10.32604/cmc.2021.015048
K Karthik, D Radhika, D Gnanasangeetha, K Gurushankar, ME Hoque. Two-dimensional based hybrid materials for photocatalytic conversion of carbon dioxide into hydrocarbon fuels: A mini review. Physics and Chemistry of Solid State, 22 (1), 132-140, 2021. https://doi.org/10.15330/pcss.22.1.132-140
SMA Rahman, AM Nassef, H Rezk, MEH Assad, ME Hoque. Experimental investigations and modeling of vacuum oven process using several semi-empirical models and a fuzzy model of cocoa beans. Heat Mass Transfer 57, 175–188 (2021). https://doi.org/10.1007/s00231-020-02943-5
Mohsen Golieskardi, Meenaloshini Satgunam, Dinesh Ragurajan, Md Enamul Hoque, Angela Min Hwei Ng. Microstructural, Tribological, and Degradation Properties of Al2O3- and CeO2-Doped 3 mol.% Yttria-Stabilized Zirconia Bioceramic for Biomedical Applications. Journal of Materials Engineering and Performance, 29, 2890–2897, 2020; https://doi.org/10.1007/s11665-020-04829-3
Md. Eaqub Ali, Md Enamul Hoque, SK Safdar Hossain, Manik Chandra Biswas. Nanoadsorbents for Wastewater Treatment – Next Generation Biotechnological Solution. International Journal of Environmental Science and Technology, Published online on 26 May 2020; DOI: https://doi.org/10.1007/s13762-020-02755-4
T Nuge, KY Tshai, SS Lim, N Nordin, ME Hoque. Characterization and optimization of the mechanical properties of electrospun gelatin nanofibrous scaffolds. World Journal of Engineering. Vol. 17(1), pp. 12-20, 2020; https://doi.org/10.1108/WJE-04-2019-0119
Varun Prasath Padmanabhan, Ravichandran Kulandaivelu, Vijayaraj Venkatachalam, Sarath Chandra Veerla, Faruq Mohammad, Hamad A. Al-Lohedan, Won Chun Oh, Romana Schirhagl, Prasanna Kumar Obulapuram, Md Enamul Hoque, Suresh Sagadevan. Influence of sonication towards the physicochemical and biological characteristics of selenium substituted hydroxyapatites. New Journal of Chemistry. Published online on 22 Sep 2020; https://doi.org/10.1039/D0NJ03771K
Mohsen Golieskardi, Meenaloshini Satgunam, Dinesh Ragurajan, Md Enamul Hoque, Angela Min Hwei Ng & Lohashenpahan Shanmuganantha (2019). Advanced 3Y-TZP bioceramic doped with Al2O3 and CeO2 potentially for biomedical implant applications, Materials Technology. Vol. 34(8), pp. 480-489, 2019; DOI: 10.1080/10667857.2019.1578912
Varun Prasath Padmanabhan, Sankara Narayanan, T.S.N., Suresh Sagadevan, Md Enamul Hoque and Ravichandran Kulandaivelu. Advanced lithium substituted hydroxyapatite nanoparticles for antimicrobial and hemolytic studies. New Journal of Chemistry. Vol 43(47), pp. 18484-18494, 2019; https://doi.org/10.1039/C9NJ03735G
Md Enamul Hoque, Sumona Azad, Mansura Ahmed, Sk S M Tareq Aziz Shovon, Md. Tareq Aziz, Sharjis Ibne Wadud. A Low-Cost Multichannel Prosthetic Hand: Design and Development. International Journal of Mathematics and Computers in Simulation, Vol. 13, pp. 9-13, 2019.
M. Enamul Hoque, J. Mahmoud Ghorban Daei, M. Khalid. Next Generation Biomimetic Bone Tissue Engineering Matrix From Poly (L- Lactic Acid) Pla/Calcium Carbonate Composites Doped With Silver Nanoparticles. Current Analytical Chemistry. Vol. 14(3), pp. 268 – 277, 2018; DOI: 10.2174/1573411013666171003155024
M Enamul Hoque, A. Maryanne Peiris, S. M. Atiqure Rahman, M. Abdul Wahab. New Generation Antibacterial Nanofibrous Membrane For Potential Water Filtration. Current Analytical Chemistry. Vol. 14(3), pp. 278 – 284, 2018; DOI: 10.2174/1573411013666171009162832.
S. Sagadevan, Z. Z. Chowdhury, M. R. Bin Johan, R. F. Rafique, F. A. Aziz, M. Enamul Hoque, R. Suriakarthick. Investigation on Optical, Dielectric And In Vitro Anti-Inflammatory Responses of Titanium Dioxide (Tio2) Nanoparticles. Digest Journal of Nanomaterials and Biostructures Vol. 13(3), pp. 641 – 652, 2018.
Md A Wahab, Nazrul Islam, M Enamul Hoque and David James Young. Recent Advances in Silver Nanoparticle Containing Biopolymer Nanocomposites for Infectious Disease Control – A Mini Review. Current Analytical Chemistry. Vol. 14(6), pp. 198 - 202, 2018; DOI: 10.2174/1573411013666171009163829
Md Enamul Hoque, Wahab M A, Daei J M G, Chuan Y L. Polycaprolactone (PCL) based synthetic biopolymers for modern scaffold-based tissue engineering. International Journal of Applied Science - Research and Review. Vol. 5, pp. 56, 2018; DOI: 10.21767/2394-9988-C2-006
Sagadevan S, Chowdhury ZZ, Johan M. RB, Khan A.A, Aziz FA, F. Rafique R, Hoque M.E. A facile hydrothermal approach for catalytic and optical behavior of tin oxide- graphene (SnO2/G) nanocomposite. PLoS ONE 13(10): e0202694, 2018. https://doi.org/10.1371/journal.pone.0202694.
Isha Das, Suresh Sagadevan, Zaira Zaman Chowdhury, M Enamul Hoque. Development, optimization and characterization of a two step sol-gel synthesis route for ZnO/SnO2 nanocomposite. Journal of Materials Science: Materials in Electronics, Vol. 29(5), pp. 4128–4135, 2018; https://doi.org/10.1007/s10854-017-8357-5
S. M. Sapuan, Mohammad Jawaid, M. Enamul Hoque. Biopolymers and Biocomposites: Chemistry and Technology. Current Analytical Chemistry. Vol. 14(3), pp. e184, 2018; DOI: 10.2174/157341101403180507115057.
Dinesh Ragurajan, Mohsen Golieskardi, Meenaloshini Satgunam, Md Enamul Hoque, Angela Ng Min Hwei, Mariyam Jameelah Ghazali, Ahmad Kamal Ariffin. Advanced 3Y-TZP Bioceramic Doped with Al2O3 and MnO2 Particles Potentially for Biomedical Applications: Study on Mechanical and Degradation Properties. Journal of Materials Research and Technology, Vol. 7(4), 2018, pp. 432–442; https://doi.org/10.1016/j.jmrt.2017.05.015
M Enamul Hoque. Robust formulation for the design of tissue engineering scaffolds: A comprehensive study on structural anisotropy, viscoelasticity and degradation of 3D scaffolds fabricated with customized desktop robot based rapid prototyping (DRBRP) system. Materials Science and Engineering C, Vol. 72, 2017, pp. 433–443, 2017; http://dx.doi.org/10.1016/j.msec.2016.11.019.
Suresh Sagadevan, Zaira Zaman Chowdhury, Md Enamul Hoque and Jiban Podder. Chemically stabilized reduced graphene oxide/zirconia nanocomposite: synthesis and characterization. Materials Research Express, Vol. 4(11), Paper ID 115031, pp 1-13, 2017.
Suresh Sagadevan, Kaushik Pal, Zaira Zaman Chowdhury, M. Enamul Hoque. Structural, dielectric and optical investigation of chemically synthesized Ag-doped ZnO nanoparticles composites. Journal of Sol-Gel Science and Technology. Vol. 83(2), pp 394–404, 2017; DOI 10.1007/s10971-017-4418-8.
T. Nuge, K. Y. Tshai, S. S. Lim, N. Nordin, M. E. Hoque. Preparation And Characterization Of Cu, Fe-, Ag-, Zn- And Ni- Doped Gelatin Nanofibers For Possible Applications In Antibacterial Nanomedicine. Journal of Engineering Science and Technology, Vol. 12 (Special Issue 3), pp. 68-81, 2017
S. Md Atiqure Rahman, M. Enamul Hoque, Saidur Rahman, M. Mahbubur Rahman. A Novel Vortex Tube‐Assisted Atmospheric Freeze‐Drying System: Effect of Osmotic Pretreatment on Biological Products. Journal of Food Process Engineering. Vol. 40, pp. e12449 (11 pages), 2017; https://doi.org/10.1111/jfpe.12449.
Suresh Sagadevan, Jagpreet Singh, Kaushik Pal, Zaira Zaman Chowdhury, Md Enamul Hoque. Hydrothermal synthesis of zinc stannate nanoparticles spectroscopic investigation. Journal of Materials Science: Materials in Electronics, Vol. 28(15), pp 11268–11274, 2017; DOI:10.1007/s10854-017-6916-4.
Suresh Sagadevan, Kaushik Pal, Enamul Hoque, Zaira Zaman Chowdhury. A chemical synthesized Al-doped PbS nanoparticles hybrid composite for optical and electrical response. Journal of Materials Science: Materials in Electronics, Vol. 28(15), pp 10902–10908, 2017; DOI:10.1007/s10854-017-6869-7.
Suresh Sagadevan, Kaushik Pal, Zaira Zaman Chowdhury, Md Enamul Hoque. Structural, optical and dielectric investigation of CdFe₂O₄ nanoparticles. Materials Research Express, Vol. 4 (7), pp. 1- 12, 2017; https://doi.org/10.1088/2053-1591/aa77b5
M. Enamul Hoque, Arsalan Maroof Khan, M. S. Islam, M. Asim, M. Jawaid, O. A. Othman. Effects of natural degradation on the mechanical and morphological properties of tropical woods. Cellulose Chemistry and Technology, Vol. 50(7-8), pp. 723-730, 2016; http://www.cellulosechemtechnol.ro/firstonline.php.
S.M. Sapuan, W.H. Haniffah, Faris M. AL-Oqla, Y. Nukman, M. Enamul Hoque, M.L. Sanyang. Effects of Reinforcing Elements on the Performance of Laser Transmission Welding Process in Polymer Composites: A Systematic Review. International Journal of Performability Engineering, Vol. 12(6), pp. 535-550, 2016.
Mohammad Reza Ketabchi, Mohammad Khalid, Chantara Thevy Ratnam, Sivakumar Manickam, Rashmi Walvekar, Md Enamul Hoque. Sonosynthesis of Cellulose Nanoparticles (CNP) from Kenaf Fiber: Effects of Processing Parameters. Fibers and Polymers, Vol. 17(9), pp. 1352-1358, 2016; DOI: 10.1007/s12221-016-5813-4
Feven Mattews Michael, Mohammad Khalid, Rashmi Walvekar, Chantara Thevy Ratnam, Suganti Ramarad, Humaira Siddiqui, M. Enamul Hoque. Effect of Nanofillers on the Physico-Mechanical Properties of Load Bearing Bone Implants. Materials Science and Engineering C Vol. 67, pp. 792–806, 2016; DOI:10.1016/j.msec.2016.05.037
Feven Mattews Michael, M. Khalid, C.T. Ratnam, Ching Yern Chee, W. Rashmi, M.E. Hoque. Sono-synthesis of nanohydroxyapatite: Effects of process parameters. Ceramics International, Vol. 42(5), pp. 6263–6272, 2016; DOI:10.1016/j.ceramint.2016.01.009
Feven Mattews Michael, M. Khalid, C.T. Ratnam, W. Rashmi, M.E. Hoque, M. Reza Ketabchi. Nanohydroxyapatite synthesis using optimized process parameters for load-bearing implant. Bulletin of Materials Science, Vol. 39(1), pp. 133-145, 2016; DOI: 10.1007/s12034-015-1120-8
M. Enamul Hoque, Tan Wei Jin, Saied H. Mohamed. Physical and mechanical characteristics of conventional dental porcelain: effects of exposure environments. Materials Letters, Vol. 143, pp. 67-70, 2015; DOI:10.1016/j.matlet.2014.12.085
Sai Aditya Pradeep, G. Prem Kumar, A.R. Phani, R.G.S.V. Prasad, M. Enamul Hoque, H.L. Raghavendra. Fabrication, characterization and in vitro osteogenic potential of polyvinyl pyrrolidone-titania (PVP-TiO) nanofibers. Analytical Chemistry Letters, Vol. 5(2), pp.61-72, 2015; www.tandfonline.com/doi/pdf/10.1080/22297928.2015.1048728
K.Y. Tshai, H.J. Tan, P.S. Khiew, M.E. Hoque and C.H. Chia. Effects of Aluminum Trihydrate on the Flame-Retardant and Smoke-Suppressant Properties of Natural Fibres Filled Composites. Polymers Research Journal. 9(2), 181-195, 2015.
Faris M. AL- Oqla, S. M. Sapuan, T. Anwer, M. Jawaid, M. E. Hoque. Natural fiber reinforced conductive polymer composites as functional materials: A review. Synthetic Metals, Vol. 206, pp. 42 – 54, 2015; DOI:10.1016/j.synthmet.2015.04.014
W. H. Haniffah, S. M. Sapuan, K. Abdan, M. Khalid, M. Hasan, M. Enamul Hoque. Kenaf fibre reinforced polypropylene composites: effect of cyclic immersion on tensile properties. International Journal of Polymer Science, Vol. 2015, Article ID 872387, pp. 1-6, 2015; http://dx.doi.org/10.1155/2015/872387
S.M. Atiqure Rahman, M. Enamul Hoque, S. Rahman and M. Hasanuzzaman. Osmotic Dehydration of Pumpkin Using Response Surface Methodology - Influences of Operating Conditions on Water Loss and Solute Gain. Journal of Bioprocessing & Biotechniques, Vol. 5(5), pp. 1 – 6, 2015; DOI: 10.4172/2155-9821.1000226
M. Asim, Khalina Abdan, M. Jawaid, M. Nasir, Zahra Dashtizadeh, M. R. Ishak,M. Enamul Hoque and Y. Deng. A Review on Pineapple Leaves Fibre and Its Composites. International Journal of Polymer Science, Article ID 950567, pp. 1- 16, 2015; http://dx.doi.org/10.1155/2015/950567
Y. Leng Chuan, M. Enamul Hoque, Chan Jian Sheng, Saktiyaramana Karpayah and Mohammad Hossein Sharifi. Applying Nature's Best Ideas to Biomimetics: Frog Calling. Journal of Applied Mechanical Engineering, Vol. 4(1), pp. 1-2, 2015; DOI: 10.4172/2168-9873.1000150
A. Azali, S. M. Sapuan, Zulkifli Abdul Rahman, N. M. Adam, Mahbub Hasan, M. Enamul Hoque. Temperature profile of produced gas in oil palm biomass fluidized bed gasifier: Effect of fibre/shell composition ratio. Journal of Bioprocessing & Biotechniques, Vol. 5(8), Paper Id. 245, pp. 1-6; 2015; DOI: 10.4172/2155-9821.1000245
M. Enamul Hoque, Tamrin Nuge, Tshai Kim Yeow, Norshariza Nordin, R.G.S.V. Prasad. Gelatin Based Scaffolds For Tissue Engineering – A review. Polymers Research Journal, Vol. 9(1), pp. 15-32, 2015.
Azizeh-Mitra Yousefi, Md Enamul Hoque, R.G.S.V.Prasad, Nicholas Uth. Current strategies in multiphasic scaffold design for osteochondral tissue engineering: A review. Journal of Biomedical Materials Research: Part A, Vol. 103(7), pp. 2460-2481, 2015; DOI: 10.1002/jbm.a.35356
M. Enamul Hoque, Terrence Teh Hooi Meng, Y. Leng Chuan, Moniruddin Chowdhury, R.G.S.V. Prasad. Fabrication and characterization of hybrid PCL/PEG 3D scaffolds for potential tissue engineering applications. Materials Letters, Vol. 131, pp. 255 - 258, 2014; DOI:10.1016/j.matlet.2014.05.111
M. Enamul Hoque, M. A. M. Aminudin, M. Jawaid, M. S. Islam, N. Saba, M. T. Paridah. Physical, Mechanical, and Biodegradable Properties of Meranti Wood Polymer Composites. Materials & Design, Vol. 64, pp. 743, 2014; Doi: 10.1016/j.matdes.2014.08.024
Sheikh Imranudin Sheikh-Ali, Akil Ahmad, Siti-Hamidah Mohd-Setapar, Zainul Akmal Zakaria, Norfahana Abdul-Talib, Aidee Kamal Khamis, Md Enamul Hoque. The potential hazards of Aspergillus sp. in foods and feeds, and the role of biological treatment: A review. Journal of Microbiology, Vol. 52(10), pp. 807-818, 2014; DOI: 10.1680/bbn.14.00014
Sheik Mohideen Mohamed Nainar, Shahida Begum, M. N. M. Ansari, Md. Enamul Hoque, S. Sharen Aini, M. H. Ng, B. H. I. Ruszymah. Effect of compatibilizers on in vitro biocompatibility of PLA-HA bioscaffold. Bioinspired, Biomimetic and Nanobiomaterials, Vol. 3(4), pp. 208-216, 2014; DOI: 10.1680/bbn.14.00014
K. Y. Tshai, A. B. Chai, I. Kong, M. E. Hoque and K. H. Tshai. Hybrid Fibre Polylactide Acid Composite with Empty Fruit Bunch: Chopped Glass Strands. Journal of Composites, Vol. 2014, Article ID 987956, pp. 1- 7, 2014; Doi: 10.1155/2014/987956
M. Enamul Hoque, Nurul Sakinah, Y. Leng Chuan, M.N.M. Ansari. Synthesis and Characterization of Hydroxyapatite Bioceramic. International Journal of Scientific Engineering and Technology, Vol. 3(5), pp. 458, 2014.
Y. L. Chuan, M. Enamul Hoque. Engineering and Biomimetics: Harnessing Light Energy for Sustainability. Journal of Applied Mechanical Engineering. Vol. 3, pp. e131, 2014; doi:10.4172/2168-9873.1000e131.
M. Enamul Hoque, L. Weng Lum, M.N.M. Ansari. Computational Characterization of Porous and Mechanical Properties of 3D Scaffolds for Potential Tissue Engineering Applications. International Journal of Science, Engineering And Technology, Vol. 2(4), pp. 138, 2014.
M Enamul Hoque, Tan Wei Jin, Saied Hamd Mohamed, Moniruddin Chowdhury. Physical and Mechanical Characterization of Conventional Dental Porcelain: Study On Environmental Effects. Regenerative Research, Vol. 3(2), pp. 154, 2014.
M. Enamul Hoque, R.G.S.V. Prasad. Lab-on-a-chip: A mechanistic approach for biological screening. Journal of Applied Mechanical Engineering. Vol. 3(2), pp. e127, 2014; DOI: 10.4172/2168-9873.1000e127.
Sharen Aini S, Mohamed Nainar S, Shahida Begum, Ansari MNM, Vicki WV, Hoque ME, Ng MH and Ruszymah BHI. Biocompatibility Screening Of Biomaterials For Bone Tissue Engineering – Study Of The Osteogenic Cell Morphology And Attachment Behaviour In Vitro. Regenerative Research, Vol. 3(2), pp. 171, 2014.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby, S. Sheren Aini, Angela Ng Min Hwei, Ruszymah Idrus. Hybrid and Single Design Scaffolds for New Generation Tissue Engineering Applications. Advanced Science, Engineering and Medicine, Vol. 6(1), pp. 92, 2014; DOI: http://dx.doi.org/10.1166/asem.2014.1462
Sivaruby Kanagaratnam, M. Enamul Hoque, Miskandar Mat Sahri and Andrew Spowage. Investigating the effect of deforming temperature on the oil-binding capacity of palm oil based shortening. Journal of Food Engineering, Vol. 118(1), pp. 90, 2013; DOI:10.1016/j.jfoodeng.2013.03.021
Md Enamul Hoque, R.G.S.V. Prasad. Rapid Prototyping Technology in Bone Tissue Engineering. Journal of Applied Mechanical Engineering, Vol. 2(5), pp. e124, 2013; DOI: 10.4172/2168-9873.1000e124.
Md Enamul Hoque, Muhammad Shehryar, Khandakar Md Nurul Islam. Processing and characterization of cockle shell calcium carbonate (CaCO₃) bioceramic for potential application in bone tissue engineering. Journal of Material Sciences & Engineering. Vol 2(4), pp. 132, 2013; doi.org/10.4172/2169-0022.1000132
Moniruddin Chowdhury, M Enamul Hoque, Rajamanickam Baskar, William Ying Khee Hwang. Umbilical cord blood stem cells as a source of non-hematopoietic cells: Role in regenerative medicine. Regenerative Research. Vol. 2(2), pp. 1, 2013
Md Enamul Hoque, Tan Jie Ye, Leng Chuan Yong, and KhairulZaman Mohd Dahlan. Sago Starch-Mixed Low-Density Polyethylene Biodegradable Polymer: Synthesis and Characterization. Journal of Materials, Vol. 2013, Article ID 365380, 7 pages, 2013; DOI:10.1155/2013/365380
Tamrin Nuge, M Enamul Hoque, Tshai Kim Yeow, Norshariza Nordin, Moniruddin Chowdhury. Electrospun gelatin composite nanofibres: A review on structural and mechanical characterizations. Regenerative Research. Vol. 2(2), pp. 39-42, 2013.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby, Rusnah Mustaffa, S. Sheren Aini, Angela Ng Min Hwei, Ruszymah Idrus. Single and Hybrid Design Polycaprolactone (PCL) Scaffolds: Cell Culture Study. Journal of Materials Science and Engineering A, Vol. 3 (5), pp. 315, 2013
Yong L. Chuan, Md. E. Hoque, and Ian Pashby. Prediction of patient-specific tissue engineering scaffolds for optimal design. International Journal of Modeling and Optimization, Vol. 3, No. 5, pp. 468-470, 2013; DOI: 10.7763/IJMO.2013.V3.322
M. Enamul Hoque, Lu Pui Gee. Biodiesel from Plant Resources - Sustainable Solution to Ever Increasing Fuel Oil Demands. Journal of Sustainable Bioenergy System, Vol. 3, pp. 163-170, 2013; DOI: 10.4236/jsbs.2013.33023
Md Enamul Hoque, Tamrin Nuge, Tshai Kim Yeow and Norshariza Nordin. Electrospinning of Gelatin Nanofibre: Current Trends in Tissue Engineering Applications. Journal of Applied Mechanical Engineering. Vol. 2(4), pp e122, 2013; doi: 10.4172/2168-9873.1000e122
M. Enamul Hoque, Thayabaran Ramasamy, Tamrin Nuge. Hybrid Nanofibre Matrix for Regenerative Therapy Fabricated by Electrospinning: Effects of Process Parameters on the Fibre Efficacy. Journal of Nanomedicine and Biotherapeutic Discovery. Vol. 4(1), pp 118, 2013; http://dx.doi.org/10.4172/2155-983X.1000118 (Ranked as Best Paper in the Issue).
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby, Angela Ng Min Hwei. Extrusion Based Rapid Prototyping Technique: An Advanced Platform for Tissue Engineering Scaffold Fabrication. Biopolymers, Vol 97(2), pp. 83, 2012.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby. Development of PCL-PEG Hybrid Tissue Engineering Scaffolds Using Extrusion Based Rapid Prototyping System. Regenerative Research, Vol. 1, Supplement 1, pp. 22, 2012.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby, S. Sheren Aini, A. Ng Min Hwei, Ruszymah Idrus. 3D Multi-Architectural Tissue Engineering Scaffolds: Degradation and Cell Culture Study. Journal of Applied Mechanical Engineering Vol. 1(3), pp. e106, 2012; DOI: http://dx.doi.org/10.4172/2168-9873.1000e106
M. Enamul Hoque, Yong Leng Chuan, Ian Pashby. Mathematical Modeling on Degradation of 3D Tissue Engineering Scaffold Materials. Regenerative Research, Vol. 1, No. 1, pp. 58, 2012.
M. E. Hoque and Obbard J. Philip. Biotechnological Recovery of Heavy Metals from Secondary Sources – An Overview. Materials Science and Engineering C, Vol. 31, pp. 57, 2011. This article was ranked 4th out of the “Hottest 25 articles published in Materials Science and Engineering: C in 2011” – Evaluated by Elsevier Publisher in March 2012.
M. Enamul Hoque, Amrit Singh, Yong Leng Chuan. Biodiesel from low cost feedstocks: The effects of process parameters on the biodiesel yield. Biomass and Bioenergy, Vol 35(4), pp. 1582, 2011.
M. E. Hoque, Y. L. Chuan, Ian Pashby, Angela Ng Min Hwei, Ruszymah Idrus. Process Optimization to Improve the Processing of Poly(DL-Lactide-co-Glycolide) into 3D Tissue Engineering Scaffolds. International Federation for Medical and Biological Engineering Proceedings, Vol. 35, pp. 836, 2011.
M. Enamul Hoque. Rapid Prototyping Technique – Today’s and Tomorrow’s Technology to Develop 3D Tissue Engineering Scaffold. The Medical Journal of Malaysia, Vol. 65, Supplement B, pp. 33, 2010.
M. Enamul Hoque, L. Festus Oguichen, Angela Ng, Ruszymah Idrus. Physical Model of a Dynamic Bioreactor Prototype for Skin Tissue Culture. Medical Journal of Malaysia, Vol. 65, Supplement B, pp. 109, 2010.
M.Y. Yusof, W.S. Wan Abdullah, V. Tharmalingamm, A.N. Ahmad Puad, M. E. Hoque. Corrosion Detection in Pipeline by Laser Speckle Correlation. NDT Spectra, Vol. 4, pp. 14, 2010.
W.S. Wan Abdullah, M.Y. Yusof, A.N. Ahmad Puad, M. E. Hoque. Analysis of corrosion in pressurized pipelines by advanced laser shearography. Engineering e-Transaction, Vol. 4, No. 1, pp. 51, 2009.
M. Enamul Hoque, Y. S. Wong, W. Feng, S. Li, M-H Huang, M. Vert, D. W. Hutmacher. Processing of Polycaprolactone and Polycaprolactone-Based Copolymers into 3D Scaffolds, and Their Cellular Responses. Tissue Engineering: Part A, Vol. 15, No. 10, pp. 3013, 2009. This article was ranked 1st out of the “Top 10 Articles Published in the Same Domain” – Evaluated by BioMedLib in September 2010.
M. Enamul Hoque, D. Wijewardena, S. Mei Tan, S. M. Fadhlan, Angela Ng, Ruszymah Idrus. Design of an Incubator-Suited Bioreactor for Dynamic Tissue Culture – A Prototype. Tissue Engineering and Regenerative Medicine, Vol. 6, No. 12, pp. S125, 2009.
M. Enamul Hoque, W. Feng, Y.S. Wong, D.W. Hutmacher, S. Li, M-H Huang, M. Vert. In vitro physical and mechano-chemical properties of biodegradable scaffolds fabricated with PCL and PCL-PEG. International Federation for Medical and Biological Engineering Proceedings. Vol. 21, No. 3, pp. 821, 2008.
M. Enamul Hoque, W. Feng, Y.S. Wong, D.W. Hutmacher, S. Li, M-H Huang, M. Vert, P.J. Bártolo. Scaffolds Designed and Fabricated with Elastic Biomaterials Applying CAD-CAM Technique. Tissue Engineering: Part A, Vol.14, No. 5, pp.907, 2008.
Hoque, M. E., Zainal, N. H., Syarif J. Investigation on mechanical properties of contemporary metallic bone plates – Towards the development of composite bone plates. Medical Journal of Malaysia, Vol. 63, Supplement A, pp. 91, 2008.
M. E. Hoque, H.-Q. Mao, And S. Ramakrishna. Hybrid braided 3-D scaffold for bioartificial liver assist devices. Journal of Biomaterials Science: Polymer Edition, Vol. 18, No. 1, pp. 45, 2007.
M. Enamul Hoque, Y.S. Wong, W. Feng, L. Suming, M.-H. Huang, M. Vert and D.W. Hutmacher. Accelerated degradation of 3-D scaffolds fabricated with various architectures using various biopolymers via rapid prototyping technology. Journal of Biomechanics, Vol. 39, Supplement 1, pp. S261, 2006.
M. Enamul Hoque, Hutmacher Dietmar W, Feng Wei, S. Li, M-H Huang, M. Vert, Wong YS. Characterization of scaffolds-evaluation of the effect of material, scaffold architecture and test environment on mechanical properties. Tissue Engineering Part A, Vol.12, No. 4, pp.1079, 2006.
M. E. Hoque, D. W. Hutmacher, W. Feng, S. Li, M-H Huang, M. Vert, Wong Y S. Fabrication using a rapid prototyping system and in vitro characterization of PEG-PCL-PLA scaffolds for tissue engineering. Journal of Biomaterials Science: Polymer Edition, Vol. 16, No. 12, pp. 1595-1610, 2005, DOI: 10.1163/156856205774576709.

Edited Special Issues in Journals (5 Issues)

Lalit Mohan Pandey, Md Enamul Hoque, Mahesh Kumar Joshi (Guest Editors). Special Issue on ‘Advances in Bionanocomposites for Biomedical Engineering’, Materials, 2022 (Under Review).
Md Enamul Hoque, Lalit Mohan Pandey (Guest Editors). Special Issue on ‘Advances in Biochemical Engineering for Biomedical Applications’, The Open Chemical Engineering Journal (Under Review).
M E H Chowdhury, Md Enamul Hoque (Guest Editors). Special Issue on ‘Machine Learning Applications in Polymeric Biomaterials’, Polymers (Under Review).
S.M. Sapuan, M. Jawaid and M.E. Hoque (Guest Editors), Current Analytical Chemistry. Vol. 14(3), 2018.
S.M. Sapuan, R. Wirawan, M.E. Hoque, Y.A. El-Shekeil and A. Mamun (Guest Editors). Special Issue on ‘Kenaf Fibre Composites’, Advances in Materials Science and Engineering, 2014.

Books: 14 Published + 4 Under Review

Md Enamul Hoque, Kheng Lim Goh, Suresh Sagadevan (Eds). Advanced Bioceramics: Processing, Properties and Applications. CRC (Taylor & Francis Group), USA, 2024; https://www.taylorfrancis.com/books/edit/10.1201/9781003258353/advanced-bioceramics-enamulhoque-kheng-lim-goh-suresh-sagadevan
KM. Ramkumar, R. Senthilkumar, Md Enamul Hoque (Eds). Advanced Mammalian Cell Culture Techniques - Principles and Practices. CRC (Taylor & Francis Group), USA, 2024; https://doi.org/10.1201/9781003397755
Bhasha Sharma, Md Enamul Hoque, Shreya Sharma. Polysaccharides: Advanced Polymeric Materials. CRC (Taylor & Francis Group), USA, 2024; https://www.taylorfrancis.com/books/edit/10.1201/9781003265054/polysaccharides-bhasha-sharmaenamul-hoque
M. Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications. Elsevier, UK 2022. https://www.elsevier.com/books/advanced-polymer-nanocomposites/hoque/978-0-12-824492-0
Senthil Muthu Kumar Thiagamani, Md Enamul Hoque, Senthilkumar Krishnasamy, Chandrasekar Muthukumar, Habil Suchart Siengchin (Eds). Vibration and Damping Behavior of Biocomposites. CRC (Taylor & Francis Group), USA, 2022. https://doi.org/10.1201/9781003173625
M. Enamul Hoque, Ahmed Sharif, Mohammad Jawaid (Eds). Green Biocomposites For Biomedical Engineering: Design, Properties, And Applications (1^st Edition). Elsevier, UK, 2021. https://www.elsevier.com/books/green-biocomposites-for-biomedical-engineering/hoque/978-0-12-821553-1
Anish Khan, Francis Verpoort, Abdullah Asiri, Md Enamul Hoque, Anwar Bilgrami, Mohammad Azam, Kadiyala Chandra Babu Naidu (Eds). Metal-Organic Frameworks For Chemical Reactions: From Organic Transformations to Energy Applications. Elsevier, USA, 2021. https://www.elsevier.com/books/metal-organic-frameworks-for-chemical-reactions/khan/978-0-12-822099-3
Catalin Pruncu, Selim Gürgen, M. Enamul Hoque (Eds). Fiber-Reinforced Polymers: Processes and Applications. Nova Science Publishers, USA, 2021. https://novapublishers.com/shop/fiber-reinforced-polymers-processes-and-applications/
M. Jawaid, M. Sapuan Salit, Nukman Bin Yusoff, M. Enamul Hoque (Eds). Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer-Verlag, Switzerland, 2015.http://www.springer.com/gp/book/9783319079431
Y. Leng Chuan, M. Enamul Hoque. Modern Concept of New Generation Hybrid Tissue Engineering Scaffold: A Rapid Prototyping Approach. Scholars’ Press, Germany, 2014. https://www.amazon.com/Modern-Concept-Generation-Engineering-Scaffold/dp/3639669606
M. Enamul Hoque (Ed). Rapid Prototyping Technology - Principles and Functional Requirements. InTech Publisher, Uk, 2011.https://www.intechopen.com/books/rapid-prototyping-technology-principles-and-functional-requirements
M. Enamul Hoque (Ed). Advanced Applications of Rapid Prototyping Technology in Modern Engineering. InTech Publisher, UK, 2011.https://www.intechopen.com/books/advanced-applications-of-rapid-prototyping-technology-in-modern-engineering
M. Enamul Hoque. Tissue Engineering Scaffold and Rapid Prototyping Technology. Lambert Academic Publishing (LAP), Germany, 2010. https://www.amazon.com/Tissue-Engineering-Scaffold-Prototyping-Technology/dp/3838349296
M. Enamul Hoque. Bioartificial Liver Assist System: Tissue Engineering Challenges. Lambert Academic Publishing (LAP), Germany, 2010. https://www.amazon.com/Bioartificial-Liver-Assist-System-Engineering/dp/3838314603

Chapters in Books: Total 108 (91 Published + 17 Under Review)

Md Enamul Hoque, Ushama Shafoyat. Biopolymers and Their Composites for Biotechnological Applications. In: In: Arunima Reghunadhan, Akhina H, Sabu Thomas (Eds). Applications of Biopolymers in Science, Biotechnology, and Engineering (pp. 189–217). John Wiley & Sons, USA, 2024. https://doi.org/10.1002/9781119783473.ch8
Md Enamul Hoque, Md Ushama Shafoyat, Fatiha Tabassun. Polymers, Their Composites, Blends, and Nanocomposites for the Fabrication of Prosthetics. In: Arunima Reghunadhan, Akhina H, Sabu Thomas (Eds). Applications of Biopolymers in Science, Biotechnology, and Engineering (pp. 361– 389). John Wiley & Sons, USA, 2024. https://doi.org/10.1002/9781119783473.ch15
Md Enamul Hoque, Md Ushama Shafoyat. Self-healing polymer nanocomposite films and coatings. In: M. Pandey, K. Deshmukh, & C. M. Hussain (Eds.), Polymer Nanocomposite Films and Coatings (pp. 181–217). Elsevier, UK, 2024. https://doi.org/10.1016/B978-0-443-19139-8.00010-3
Ramzi Khiari, Ragab Abouzeid, Ahmed El-Gendy, Md Enamul Hoque, Qinglin Wu. Nanocomposite films: Features and suitability for food packaging. In: C. Muthukumar, S. M. K. Thiagamani, S. Krishnasamy, J. Parameswaranpillai, & S. Siengchin (Eds.), Biocomposites for Industrial Applications (pp. 355–374). Elsevier, UK, 2024. https://doi.org/10.1016/B978-0-323-91866-4.00019- 6
Muhammad Ifaz Shahriar Chowdhury, Md Enamul Hoque. Introduction to Bioceramics (History, Background, types of bioceramics, properties and applications etc.). In: Md Enamul Hoque, Kheng Lim Goh, Suresh Sagadevan (Eds). Advanced Bioceramics: Processing, Properties and Applications. Taylor & Francis (CRC Press), USA, 2023.
Sazedur Rahman, Md Enamul Hoque. Processing of Bioceramics by Extrusion and Slip Casting. In: Md Enamul Hoque, Kheng Lim Goh, Suresh Sagadevan (Eds). Advanced Bioceramics: Processing, Properties and Applications. Taylor & Francis (CRC Press), USA, 2023.
Md Enamul Hoque, Samira Islam Shaily, Asif Rayhan. Structural, Chemical Electrical, Thermal and Mechanical Properties of Bioceramics. In: Md Enamul Hoque, Kheng Lim Goh, Suresh Sagadevan (Eds). Advanced Bioceramics: Processing, Properties and Applications. Taylor & Francis (CRC Press), USA, 2023.
Tahrima Binte Rouf, Md Enamul Hoque. Bioceramics for Drug Delivery. In: Md Enamul Hoque, Kheng Lim Goh, Suresh Sagadevan (Eds). Advanced Bioceramics: Processing, Properties and Applications. Taylor & Francis (CRC Press), USA, 2023.
Goutham V Ganesh, Kannan Hairthpriya, Damodharan U, Hoque ME, Ramkumar K M. : Laboratory safety. In: KM. Ramkumar, R. Senthilkumar, Md Enamul Hoque (Eds). Advanced Mammalian Cell Culture Techniques - Principles and Practices. CRC (Taylor & Francis Group), USA, 2023.
Milan K.L, Goutham V Ganesh, Sundhar Mohandas, Hoque ME, Ramkumar K M. Preparation of media for cell culture. In: KM. Ramkumar, R. Senthilkumar, Md Enamul Hoque (Eds). Advanced Mammalian Cell Culture Techniques - Principles and Practices. CRC (Taylor & Francis Group), USA, 2023.
Milan K.L, Goutham V Ganesh, Damodharan U, Hoque ME, Ramkumar K M. Primary cell culture. In: KM. Ramkumar, R. Senthilkumar, Md Enamul Hoque (Eds). Advanced Mammalian Cell Culture Techniques - Principles and Practices. CRC (Taylor & Francis Group), USA, 2023.
Milan K.L, Goutham V Ganesh, Damodharan U, Hoque ME, Ramkumar K M. Passaging of cell lines. In: KM. Ramkumar, R. Senthilkumar, Md Enamul Hoque (Eds). Advanced Mammalian Cell Culture Techniques - Principles and Practices. CRC (Taylor & Francis Group), USA, 2023.
Milan K.L, Karan Naresh Amin, Sundhar Mohandas, Hoque ME, Ramkumar K M. Cryopreservation of cells. In: KM. Ramkumar, R. Senthilkumar, Md Enamul Hoque (Eds). Advanced Mammalian Cell Culture Techniques - Principles and Practices. CRC (Taylor & Francis Group), USA, 2023.
Milan K.L, Kannan Harithpriya, Damodharan U, Hoque ME, Ramkumar K M. Cellular Cytotoxicity. In: KM. Ramkumar, R. Senthilkumar, Md Enamul Hoque (Eds). Advanced Mammalian Cell Culture Techniques - Principles and Practices. CRC (Taylor & Francis Group), USA, 2023.
Karan Naresh Amin, Ravichandran Jayasuriya, Senthikumar R, Hoque ME, Ramkumar K M. Singlecell analysis. In: KM. Ramkumar, R. Senthilkumar, Md Enamul Hoque (Eds). Advanced Mammalian Cell Culture Techniques - Principles and Practices. CRC (Taylor & Francis Group), USA, 2023.
Md Enamul Hoque, Ahmed Hasnine Abuzar, Asif Ahmed. Processing methods and characterization techniques of sustainable polymers: Challenges and emerging technologies. In: Sabu Thomas, Pramendra Kumar Bajpai, Bhasha Sharma, Kajal Ghosal, Shashank Shekhar (Eds). Advances in Bionanocomposites: Materials, Applications, and Life Cycle. Elsevier, UK, 2023. https://doi.org/10.1016/B978-0-323-91764-3.00003-6
Tousif Reza, Rokib Uddin, Mohammad Fahim Tazwar, Md Enamul Hoque, and Yashdi Saif Autul. Mechanical, Thermal, Electrical, Optical, and Magnetic Properties of Organic Nanofillers. In: Vijay Chaudhary, Bhasha Sharma, Shashank Shekhar, and Partha Pratim Das (Eds). Nanofillers: Fabrication, Characterization and Applications of Organic Nanofillers (Volume 1). Taylor & Francis (CRC Press), USA, 2023.
Habibul Islam, Md Enamul Hoque, Shek Md Atiqure Rahman, Faris M. Al-Oqla. Environmental Impact in Terms of Nanotoxicity and Limitations of Employing Organic Nanofillers in Polymers. In: Vijay Chaudhary, Bhasha Sharma, Shashank Shekhar, and Partha Pratim Das (Eds). Nanofillers: Fabrication, Characterization and Applications of Organic Nanofillers (Volume 1). Taylor & Francis (CRC Press), USA, 2023.
Mohammad Fahim Tazwar, Syed Talha Muhtasim, Tousif Reza, Yashdi Saif Autul, and Md Enamul Hoque. Inorganic Nanofillers-Incorporated Polymeric Nanocomposites for Biomedical Applications. In: Bhasha Sharma, Vijay Chaudhary, Shashank Shekhar, and Partha Pratim Das (Eds). Nanofillers: Fabrication, Characterization and Applications of Organic Nanofillers (Volume 2). Taylor & Francis (CRC Press), USA, 2023.
Khan, S.H., Rahman, M.Z., Haque, M.R., Hoque, M.E. (2023). Characterization and Comparative Evaluation of Structural, Chemical, Thermal, Mechanical, and Morphological Properties of Plant Fibers. In: Khiari, R., Jawaid, M., Belgacem, M.N. (eds) Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-99-2473-8_1
Rahman, S., Chowdhury, M.I.S., Hoque, M.E. (2023). Annual Plant Reinforced Biocomposite Fiberboards—Investigation on Mechanical Properties. In: Khiari, R., Jawaid, M., Belgacem, M.N. (eds) Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-99-2473-8_10
Foysal Anwar, Asrafuzzaman, Kazi Faiza Amin, Md Enamul Hoque. Tools and techniques for characterizing sustainable hydrogels. In: Sabu Thomas, Purnima Jain, Bhasha Sharma, Shreya Sharma, Shashank Shekhar (Eds). Sustainable Hydrogels: Synthesis, Properties, and Applications, Elsevier, UK, 2023. https://doi.org/10.1016/B978-0-323-91753-7.00014-4
Zayed Bin Zakir Shawon, Moshiur Rahman Khan, Nusra Akter Takia, Tausif Hasan Khan, Ayesha Rahman, Md Enamul Hoque. Structure-property-function relationships of sustainable hydrogels. In: Sabu Thomas, Purnima Jain, Bhasha Sharma, Shreya Sharma, Shashank Shekhar (Eds). Sustainable Hydrogels: Synthesis, Properties, and Applications, Elsevier, UK, 2023. https://doi.org/10.1016/B978-0-323-91753-7.00017-X
Syed Zubair Ali, Md Khalid Nahian, Md Enamul Hoque. Extraction of Cellulose from Agro-Industrial Wastes. In: Showkat Bhawani, Anish Khan, Fasihuddin Badruddin Ahmad (Eds). Extraction of Natural Products from Agro-Industrial Wastes: A Green and Sustainable Approach, Elsevier, UK, 2023. https://doi.org/10.1016/B978-0-12-823349-8.00013-7
Pranta Ray, Md Enamul Hoque, M. Azam Ali. Sodium alginate nanoadsorbents for wastewater treatment: synthesis and characterizations. In: Abdullah M. Ahmed Asiri, Tahseen Kamal, Ikram Ahmad, Sobia Tabassum, Awais Ahmad (Eds). Sodium Alginate Base Nanomaterials for Wastewater Treatment. Elsevier, UK, https://doi.org/10.1016/B978-0-12-823551-5.00014-8
Habibul Islam, Md Enamul Hoque and Muhammad H. Hasan. Biodegradability of polyolefins: Processes and procedures. In: Anjana Sarkar, Bhasha Sharma, Shashank Shekhar, Shreya Sharma (Eds). Biodegradability of Conventional Plastics: Opportunities, Challenges, and Misconceptions. Elsevier, UK, 2022. https://www.elsevier.com/books/biodegradability-of-conventional-plastics/sarkar/978-0-323-89858-4
Md Zillur Rahman, M Mahfuza Khatun and Md Enamul Hoque. Plastic waste to plastic value: Role of industrial biotechnology. In: Anjana Sarkar, Bhasha Sharma, Shashank Shekhar, Shreya Sharma (Eds). Biodegradability of Conventional Plastics: Opportunities, Challenges, and Misconceptions. Elsevier, UK, 2022. https://www.elsevier.com/books/biodegradability-of-conventional-plastics/sarkar/978-0-323-89858-4
Yashdi Saif Autul, Rowfi Khan, Muhammad Ifaz Shahria Chowdhury, Md Enamul Hoque and Suresh Sagadevan. Synthesis of Two-dimensional Hybrid Materials, Unique Properties, and Challenges. In: Kishor Kumar Sadasivuni, Karthik Kannan, Aboubakr M Abdullah, Bijandra Kumar (Eds). 2D Nanomaterials for CO2 Conversion into Chemicals and Fuels. Royal Society of Chemistry, UK, 2022; https://doi.org/10.1039/9781839165542-00064
Muhammad Ifaz Shahriar Chowdhury, Md Enamul Hoque and Shek Md Atiqure Rahman. CO2 Conversion to Chemicals and Fuel Cells Using Renewable Energy Sources. In: Kishor Kumar Sadasivuni, Karthik Kannan, Aboubakr M Abdullah, Bijandra Kumar (Eds). 2D Nanomaterials for CO2 Conversion into Chemicals and Fuels. Royal Society of Chemistry, UK, 2022; https://doi.org/10.1039/9781839165542-00126
Habibul Islam, Md Enamul Hoque, Carlo Santulli. Polymer Nanocomposites for Biomedical Applications. In: Md Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications, Elsevier, UK, 2022. DOI: https://doi.org/10.1016/B978-0-12-824492-0.00016-7
Mamun Rabbani, Sharjis Ibne Wadud, Md Enamul Hoque. Polymer Nanocomposites for Microelectronic Devices and Biosensors. In: Md Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications, Elsevier, UK, 2022. DOI: https://doi.org/10.1016/B978-0-12-824492-0.00002-7.
Kazi Faiza Amin, Asrafuzzaman, Ayeman Mazdi Nahin, Md Enamul Hoque. Polymer Nanocomposites for Adhesives and Coatings. In: Md Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications, Elsevier, UK, 2022. DOI: https://doi.org/10.1016/B978-0-12-824492-0.00014-3
Muhammad Ifaz Shahriar Chowdhury, Yashdi Saif Autul, Sazedur Rahman, Md Enamul Hoque. Polymer Nanocomposites for Automotive Applications. In: Md Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications, Elsevier, UK, 2022. DOI: https://doi.org/10.1016/B978-0-12-824492-0.00010-6
Asrafuzzaman, Kazi Faiza Amin, Aungkan Sen, Md Enamul Hoque. Polymer Nanocomposites for Energy. In: Md Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications, Elsevier, UK, 2022. DOI: https://doi.org/10.1016/B978-0-12-824492-0.00007-6
Adib Bin Rashid, Md Enamul Hoque. Polymer Nanocomposites for Defense Applications. In: Md Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications, Elsevier, UK, 2022. DOI: https://doi.org/10.1016/B978-0-12-824492-0.00015-5
Habibul Islam, Md Enamul Hoque. Polymer Nanocomposites for Packaging. In: Md Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications, Elsevier, UK, 2022. DOI: https://doi.org/10.1016/B978-0-12-824492-0.00008-8
Md. Rubel Alam, Tarikul Islam, Md. Reazuddin Repon and
Md Enamul Hoque. Carbon-based polymer nanocomposites for electronic textiles (e-textiles). In: Md Enamul Hoque, R. Kumar, Ahmed Sharif (Eds). Advanced Polymer Nanocomposites: Science, Technology and Applications, Elsevier, UK, 2022. DOI: https://doi.org/10.1016/B978-0-12-824492-0.00020-9
Md Sarif Sakaeyt Hosen, Md Jaynal Abedin, Md Enamul Hoque. Factors Affecting the Vibration and Damping Characteristics of Polymer Composites. In: T. Senthil Muthu Kumar, Md Enamul Hoque, K. Senthilkumar, M. Chandrasekar, Habil Suchart Siengchin. Vibration and Damping Behavior of Biocomposites, CRC (Francis & Tailors), USA, 2022.
Muhammad Ifaz Shahriar Chowdhury, Yashdi Saif Autul, Md Enamul Hoque. Free Vibration and Damping Properties of the Pineapple Leaf Fiber- and Sisal Fiber-Based Polymer Composites. In: T. Senthil Muthu Kumar, Md Enamul Hoque, K. Senthilkumar, M. Chandrasekar, Habil Suchart Siengchin. Vibration and Damping Behavior of Biocomposites, CRC (Francis & Tailors), USA, 2022.
Md Mahmudul Haque Milu, Anika Anjum, Md Asadur Rahman, Md Enamul Hoque. Influence of Compatibilizer on Free Vibration and Damping Behavior of Polymer Biocomposites. In: T. Senthil Muthu Kumar, Md Enamul Hoque, K. Senthilkumar, M. Chandrasekar, Habil Suchart Siengchin. Vibration and Damping Behavior of Biocomposites, CRC (Francis & Tailors), 2022. https://doi.org/10.1201/9781003173625
Nabila Ali, Md Enamul Hoque. Bionanocomposites in the Automotive and Aerospace Applications. In: M. Chandrasekar, K. Senthilkumar, T. Senthil Muthukumar, Habil Suchart Siengchin (Eds). Polymer Based Bio-nanocomposites - Properties, Durability and Applications, Springer Nature, Singapore, 2022. https://doi.org/10.1007/978-981-16-8578-1_13
Hosen M.S.S., Abedin M.J., Hoque M.E., Rahman M.Z. (2022) Influence of Moisture Absorption on Physico-Chemical Properties of Natural Fiber-Based Hybrid Composites. In: Muthukumar C., Krishnasamy S., Thiagamani S.M.K., Siengchin S. (eds). Aging Effects on Natural Fiber-Reinforced Polymer Composites: Durability and Life Prediction. Springer, Singapore. https://doi.org/10.1007/978-981-16-8360-2_16.
Hosen M.S.S., Hoque M.E., Rahman M.Z., Sagadevan S. (2022) Aging Effects on Mechanical Properties of Biocomposites with Recycled Polymers. In: Muthukumar C., Krishnasamy S., Thiagamani S.M.K., Siengchin S. (eds). Aging Effects on Natural Fiber-Reinforced Polymer Composites: Durability and Life Prediction. Springer, Singapore. https://doi.org/10.1007/978-981-16-8360-2_17.
Md Enamul Hoque, Zayed Bin Zakir Shawon, Dilshat Rubia Dola, Abdullah Alamin, Abu Bakkar Siddique Samrat, Tausif Hasan Khan, and Moshiur Rahman Khan. Resistive switching in bio-inspired natural solid polymer electrolytes. In: Kaushik Pal, Sabu Thomas (Eds). Functional Materials Processing for Switchable Device Modulation, Elsevier, UK, 2021. https://doi.org/10.1016/B978-0-12-823972-8.00008-3
Abolfazl Golieskardi, Md Enamul Hoque, Mohsen Golieskardi. Introduction to Green Biocomposites. In: Md Enamul Hoque, Ahmed Sharif, Mohammad Jawaid (Eds). Green Biocomposites for Biomedical Engineering: Design, Properties, and Applications, Elsevier, UK, 2021. https://doi.org/10.1016/B978-0-12-821553-1.00002-8
Jarin Tusnim, Md Enamul Hoque. Bioresorbable Biocomposites. In: Md Enamul Hoque, Ahmed Sharif, Mohammad Jawaid (Eds). Green Biocomposites for Biomedical Engineering: Design, Properties, and Applications, Elsevier, UK, 2021. https://doi.org/10.1016/B978-0-12-821553-1.00004-1
Reaz Ahmed Chowdhury, Arif Mohaimin Sadri, M Enamul Hoque. Industrial Implementations of Biocomposites. In: Md Enamul Hoque, Ahmed Sharif, Mohammad Jawaid (Eds). Green Biocomposites for Biomedical Engineering: Design, Properties, and Applications, Elsevier, UK, 2021. https://doi.org/10.1016/B978-0-12-821553-1.00020-X
R. Kumar, P. Suresh Kumar, Md Enamul Hoque. Ethical Issues of Biocomposites. In: Md Enamul Hoque, Ahmed Sharif, Mohammad Jawaid (Eds). Green Biocomposites for Biomedical Engineering: Design, Properties, and Applications, Elsevier, UK, 2021. https://doi.org/10.1016/B978-0-12-821553-1.00019-3
Manik Chandra Biswas, Pranab K. Nandy, Md Enamul Hoque. Safety and Health Issues of Biocomposites. In: Md Enamul Hoque, Ahmed Sharif, Mohammad Jawaid (Eds). Green Biocomposites for Biomedical Engineering: Design, Properties, and Applications, Elsevier, UK, 2021. https://doi.org/10.1016/B978-0-12-821553-1.00003-X
S. Ravichandran, Suresh Sagadevan, Md Enamul Hoque. Physical, Mechanical, and Thermal Properties of Fiber‐Reinforced Hybrid Polymer Composites . In: K. Senthilkumar, T. Senthil Muthukumar, M. Chandrasekar, N. Rajini, Habil Suchart Siengchin (Eds). Natural Fibre-Reinforced Hybrid Polymer Composites: Thermal Properties and Applications, Wiley VCH, Germany, 2021.
Biswas M.C., Lubna M.M., Mohammed Z., Ul Iqbal M.H., Hoque M.E. (2021) Graphene and Carbon Nanotube-Based Hybrid Nanocomposites: Preparation to Applications. In: Qaiss A..K., Bouhfid R., Jawaid M. (eds) Graphene and Nanoparticles Hybrid Nanocomposites. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-33-4988-9_3
Suresh Sagadevan, Mohd. Rafie Johan, Md Enamul Hoque, J. Anita Lett, Preeti Singh and Muthukrishnan Lakshmipathy. Advanced Hybrid Conducting Polymers: Tissue Engineering Aspects. In: Syed Shahabuddin, Mohammad Khalid, Priyanka Jagadish, Adarsh Kumar Pandey (Eds). Advances in Hybrid Conducting Polymer Technology, Springer, USA, 2021; https://doi.org/10.1007/978-3-030-62090-5_10
Amin K.F., Asrafuzzaman, Sharif A., Md Enamul Hoque (2021) Bamboo/Bamboo Fiber Reinforced Concrete Composites and Their Applications in Modern Infrastructure. In: Jawaid M., Mavinkere Rangappa S., Siengchin S. (Eds) Bamboo Fiber Composites. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-15-8489-3_15
Asrafuzzaman, Amin K.F., Sharif A., Hoque M.E. (2021) Bonding Mechanism and Interface Enhancement of Bamboo Fiber Reinforced Composites. In: Jawaid M., Mavinkere Rangappa S., Siengchin S. (Eds) Bamboo Fiber Composites. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-15-8489-3_12
Asrafuzzaman, Kazi Faiza Amin, Md Enamul Hoque. Introduction to Fiber-Reinforced Polymers. In: Catalin Iulian Pruncu, Selim Gürgen, Md Enamul Hoque (Eds). Fiber-Reinforced Polymers: Processes and Applications, Nova Science Publishers, USA, 2021.
Mostakima Mafruha Lubna, Zaheeruddin Mohammed, Manik Chandra Biswas, Md Enamul Hoque. Fiber-Reinforced Polymer Applications in Aviation. In: Catalin Iulian Pruncu, Selim Gürgen, Md Enamul Hoque (Eds). Fiber-Reinforced Polymers: Processes and Applications, Nova Science Publishers, USA, 2021.
R. Kumar, R. Manju, S. Vijay Ananth, Md Enamul Hoque, C.K. Sharath Krishnan, Frezghi Tesfom. Mechanical Properties of Fiber-Reinforced Polymers. In: Catalin Iulian Pruncu, Selim Gürgen, Md Enamul Hoque (Eds). Fiber-Reinforced Polymers: Processes and Applications, Nova Science Publishers, USA, 2021.
Muammer Din Arif, Md Asadur Rahman, Md Mahmudul Haque Milu, Abu Bakar Siddik and Md Enamul Hoque. Green Nanomaterials: Synthesis, Properties & Spectroscopic Applications. In: Kaushik Pal (Ed). Functional Semiconductor Nanomaterials Spectroscopic Applications, Jenny Stanford Publishing, Singapore, 2021. DOI:10.1201/9781003160335-8.
Manik Chandra Biswas, Mostakima Mafruha Lubna, Md Hasan Ul Iqbal, Zaheeruddin Mohammed, Md Enamul Hoque. Future Trends for Fiber-Reinforced Polymers. In: Catalin Iulian Pruncu, Selim Gürgen, Md Enamul Hoque (Eds). Fiber-Reinforced Polymers: Processes and Applications, Nova Science Publishers, USA, 2021.
Md Enamul Hoque, Yong Leng Chuan, Pang Ming Meng. Agro-based Green Biocomposites for Packaging Applications. In: Naheed Saba, Mohammad Jawaid, Mohamed Thariq bin Hameed Sultan (Eds). Biopolymers and Biocomposites from Agro-Waste for Packaging Applications, Elsevier, UK, 2020. https://doi.org/10.1016/B978-0-12-819953-4.00008-2
Tariq Mahbub, Md Enamul Hoque. Introduction to Nanomaterials and Nanomanufacturing for Nanosensors. In: Kaushik Pal and Fernando Gomes de Souza (Eds). Nanofabrication And Smart Nanosensor Applications, Elsevier, UK, 2020; https://doi.org/10.1016/B978-0-12-820702-4.00001-5
Mamun Rabbani, M. Enamul Hoque, Zaid Bin Mahbub. Nanosensors in Biomedical Applications: Prospects and Perspectives. In: Kaushik Pal and Fernando Gomes de Souza (Eds). Nanofabrication And Smart Nanosensor Applications, Elsevier, UK, 2020; https://doi.org/10.1016/B978-0-12-820702-4.00007-6
Zayed Bin Zakir Shawon, M. Enamul Hoque, Shiplu Roy Chowdhury. Nanosensors and Nanobiosensors: Agricultural and Food Technology Aspects. In: Kaushik Pal and Fernando Gomes de Souza (Eds). Nanofabrication And Smart Nanosensor Applications, Elsevier, UK, 2020; https://doi.org/10.1016/B978-0-12-820702-4.00006-4
M. Mahfuza Khatun, M. Enamul Hoque, Sharjis Ibne Wadud, Zayed Bin Zakir Shawon. Recent developments in nanocellulose and nanohydrogel matrices—towards stem cell research and development. In: Faruq Mohammad, Hamad A. Al-Lohedan, Mohammad Jawaid (Eds). Sustainable Nanocellulose And Nanohydrogels From Natural Sources, Elsevier, UK, 2020; https://doi.org/10.1016/B978-0-12-816789-2.00015-8.
Jarin Tusnim, Md Enamul Hoque, Sakib Abrar Hossain, Ahmed Abdel-Wahab, Ahmed Abdala, and Md A. Wahab. Nanocellulose and nanohydrogels for the development of cleaner energy and future sustainable materials. In: Faruq Mohammad, Hamad A. Al-Lohedan, Mohammad Jawaid (Eds). Sustainable Nanocellulose And Nanohydrogels From Natural Sources, Elsevier, UK, 2020; https://doi.org/10.1016/B978-0-12-816789-2.00004-3.
Shiplu Roy Chowdhury, Yogeswaran Lokanathan, Law Jia Xian, Fauzi Mh Busra, Muhammad Dain Yazid, Nadiah Sulaiman, Gargy Lahiry, Md Enamul Hoque. 3D Printed Bioscaffolds for Developing Tissue-Engineered Constructs. In: Evren Yasa (Ed). Design Engineering and Manufacturing, IntechOpen, UK. Published on 28 May 2020. DOI: 10.5772/intechopen.92418
Sushmita Majumder, Ahmed Sharif and Md Enamul Hoque. Electrospun Cellulose Acetate Nanofiber: Characterizations and Applications. In: Faris M. Al-Oqla and M Sapuan Salit (Eds). Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers, Elsevier, UK, 2020. https://doi.org/10.1016/B978-0-12-819661-8.00009-3
Jarin Tusnim, Md Enamul Hoque, Manik Chandra Biswas. Biopolymers in Building Materials. In: Faris M. Al-Oqla And M Sapuan Salit (Eds). Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers, Elsevier, UK, 2020. https://doi.org/10.1016/B978-0-12-819661-8.00012-3
Tilottoma Saha, Md Enamul Hoque, Tariq Mahbub. Biopolymers for Sustainable Packaging in Food, Cosmetics and Pharmaceuticals. In: Faris M. Al-Oqla and M Sapuan Salit (Eds). Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers, Elsevier, UK, 2020. https://doi.org/10.1016/B978-0-12-819661-8.00013-5
Md Enamul Hoque, Tamrin Nuge, Tshai Kim Yeow, Norshariza Nordin. Electrospun Matrices from Natural Polymers for Skin Regeneration. In: Sarat K Swain, M. Jawaid (Eds). Nanostructured polymer composites for biomedical application, Elsevier, UK, 2019. https://doi.org/10.1016/B978-0-12-816771-7.00005-3
Suresh Sagadevan, Aysha Fareen, Md Enamul Hoque, Zaira Zaman Chowdhury, Mohd. Rafie Bin Johan, Rahman F. Rafique, Fauziah Abdul Aziz, J. Anita Lett. Nanostructured Polymer Biocomposites: Pharmaceutical Applications. In: Sarat K Swain, M. Jawaid (Ed). Nanostructured polymer composites for biomedical application, Elsevier, UK, 2019. https://doi.org/10.1016/B978-0-12-816771-7.00012-0
Sharif A., Mondal S., Hoque M.E. (2019) Polylactic Acid (PLA)-Based Nanocomposites: Processing and Properties. In: Sanyang M., Jawaid M. (eds) Bio-based Polymers and Nanocomposites. Springer, Cham. https://doi.org/10.1007/978-3-030-05825-8_11
Sharif A., Hoque M.E. Renewable Resource-Based Polymers. In: Sanyang M., Jawaid M. (Eds) Bio-based Polymers and Nanocomposites. Springer, USA, 2019. https://doi.org/10.1007/978-3-030-05825-8_1
SK Safdar Hossain, M Enamul Hoque. Polymer Nanocomposite Materials in Energy Storage: Properties and Applications. In: M. Jawaid, M Mansoob Khan (Eds). Polymer-based Nanocomposites for Energy and Environmental Applications, Woodhead Publishing, Elsevier, UK, 2018. https://doi.org/10.1016/B978-0-08-102262-7.00009-X
Rahman M., Zahin F., Saadi M.A.S.R., Sharif A., Hoque M.E. (2018) Surface Modification of Advanced and Polymer Nanocomposites. In: Dasgupta N., Ranjan S., Lichtfouse E. (eds) Environmental Nanotechnology. Environmental Chemistry for a Sustainable World, vol 14. Springer, Cham. https://doi.org/10.1007/978-3-319-76090-2_6
Mohammad Khalid, Chantara Thevy Ratnam, Rashmi Walvekar, Mohammad Reza Ketabchi and M. Enamul Hoque. Reinforced Natural Rubber Nanocomposites: Next Generation Advanced Material. In: Mohammad Jawaid, Mohd Sapuan Salit, Othman Y. Alothman (Eds). Green Biocomposites: Design and Applications, Springer, Switzerland, 2017. https://doi.org/10.1007/978-3-319-49382-4_14
Asha A.B., Sharif A., Hoque M.E. (2017) Interface Interaction of Jute Fiber Reinforced PLA Biocomposites for Potential Applications. In: Jawaid M., Salit M., Alothman O. (eds) Green Biocomposites. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-49382-4_13
Khalid M., Walvekar R., Ketabchi M.R., Siddiqui H., Hoque M.E. (2016) Rubber/Nanoclay Composites: Towards Advanced Functional Materials. In: Jawaid M., Qaiss A., Bouhfid R. (eds) Nanoclay Reinforced Polymer Composites. Engineering Materials. Springer, Singapore. https://doi.org/10.1007/978-981-10-1953-1_9
M. Enamul Hoque, R.G.S.V. Prasad, and S.M. Sapuan. Conducting Polymers: Drug Delivery and Tissue Engineering. In: Munmaya Mishra (Ed). Encyclopedia of Biomedical Polymers and Polymeric Biomaterials. Taylor and Francis, USA, 2015; DOI: 10.1081/E-EBPP-120049983.
M. Enamul Hoque, R.G.S.V. Prasad, R.S.L.Aparna and S.M. Sapuan. Nanofibers: Drug Delivery. In: Munmaya Mishra (Ed). Encyclopedia of Biomedical Polymers and Polymeric Biomaterials. Taylor and Francis, USA, 2015; DOI: 10.1081/E-EBPP-120050811.
Mahbub Hasan, M. Enamul Hoque, Samia Sultana Mir, N. Saba, S. M. Sapuan. Manufacturing of Coir Fiber Reinforced Polymer Composites by Hot Compression Technique. In: M. Jawaid, M. Sapuan Salit, Nukman Bin Yusoff, M. Enamul Hoque (Eds). Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer-Verlag, Switzerland, 2015. https://doi.org/10.1007/978-3-319-07944-8_15
Mohammad Reza Ketabchi, M Enamul Hoque, M Khalid Siddiqui. Critical Concerns on Manufacturing Processes of Natural Fibre Reinforced Polymer Composites. In: M. Jawaid, M. Sapuan Salit, Nukman Bin Yusoff, M. Enamul Hoque (Eds). Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer-Verlag, Switzerland, 2015. https://doi.org/10.1007/978-3-319-07944-8_6
M. Arifur Rahman, Fahmida Parvin, Mahbub Hasan, M. Enamul Hoque. Introduction to Manufacturing of Natural Fiber Reinforced Polymer Composites. In: M. Jawaid, M. Sapuan Salit, Nukman Bin Yusoff, M. Enamul Hoque (Eds). Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer-Verlag, Switzerland, 2015. https://doi.org/10.1007/978-3-319-07944-8_2
I. Kong, K. Y. Tshai, M. Enamul Hoque. Manufacturing of Natural Fibre Reinforced Polymer Composites by Solvent Casting Method. In: M. Jawaid, M. Sapuan Salit, Nukman Bin Yusoff, M. Enamul Hoque (Eds). Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer-Verlag, Switzerland, 2015. https://doi.org/10.1007/978-3-319-07944-8_16
T. C. Fong, N. Saba, C. K. Liew, R. De Silva, M. E. Hoque, K. L. Goh. Yarn flax fibres for polymer-coated sutures and hand lay-up polymer composite laminates. In: M. Jawaid, M. Sapuan Salit, Nukman Bin Yusoff, M. Enamul Hoque (Eds). Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer-Verlag, Switzerland, 2015. https://doi.org/10.1007/978-3-319-07944-8_8
M.E. Hoque, M.K. Bhuyan and S.M. Sapuan. Introduction to Engineering Composites. In: S. M. Sapuan, E. S. Zainudin, Z. Leman (Eds). Engineering Composites: Properties and Applications. UPM Press, Malaysia, 2014.
R.G.S.V. Prasad, Nilesh Prakash Nirmal, M. Enamul Hoque. 3D Organ Printing - Future Designer Organs. In: J. N. Govil (Ed). Nanotechnology Series (Volume 12). Studium Press, USA, 2014
S.M. Sapuan, J. Sahari, M. Haron, L. Yusriah and M.E. Hoque. Advances in Biofibres, Biopolymers and Biocomposites. In: S. M. Sapuan, E. S. Zainudin, Z. Leman (Eds). Engineering Composites: Properties and Applications. UPM Press, Malaysia, 2014.
M. Enamul Hoque and Y. Leng Chuan. Desktop Robot Based Rapid Prototyping System: An Advanced Extrusion Based Processing of Biopolymers into 3D Tissue Engineering Scaffolds. In: M. Enamul Hoque (Ed). Rapid Prototyping Technology - Principles and Functional Requirements. InTech Publisher, Croatia, 2011. https://www.desktop-robot-based-rapid-prototyping-system-an-advanced-extrusion-based-processing-of-biopolymers-i
M. Hasan, M. E. Hoque and S.M. Sapuan. Application of Artificial Neural Network in Composites Materials. In: S.M. Sapuan and I.M. Mujtaba (Eds). Composite Materials Technology: Neural Network Application. Taylor & Francis, USA, 2009.
D. W. Hutmacher, M. E. Hoque and Y. S. Wong. Design, Fabrication and Physical Characterization of Scaffolds Made from Biodegradable Synthetic Polymers in combination with RP Systems based on Melt Extrusion. In: Bopaya Bidanda and Paulo Bartolo (Eds). Virtual Prototyping & Bio Manufacturing in Medical Applications. Springer, USA, 2008.

Conference Proceedings/Presentations: (Total 102):

Asif Mahmud Rayhan, Md Enamul Hoque, and Adib Bin Rashid. Development of a composite bone plate - Towards biomedical vibrancy and economic viability. Tissue Engineering and Regenerative International Society (TERMIS) World Congress, June 25-28, 2024, in Seattle, Seattle, USA.
Md. Rahatuzzaman, Adiba Tasnim, Md Enamul Hoque. Computational Analysis and Characterization of PLA and ABS Scaffolds Produced Via Additive Manufacturing for Potential Hard Tissue Engineering. Tissue Engineering and Regenerative International Society (TERMIS) World Congress, June 25-28, 2024, in Seattle, Seattle, USA.
Md Enamul Hoque (Keynote Speaker). Smart Materials for Medical Devices. 7^th Annual World Congress of Smart Materials-2023, 08-10 February 2023, Sapporo, Japan
Md Enamul Hoque (Keynote Speaker). Composite Bone Plate for Novel Orthopedic Implant. International Forum on Biomaterials (BIOMATFORUM2023), 06-08 February 2023, Porto, Portugal.
Md Enamul Hoque (Invited Speaker), Mirajul Islam Sarker. Electrospun r-PET/CNT nanofibrous Mat – Towards Development of Antibacterial Face Mask. 6th Virtual Edition of Polymers, Plastics and Composites (Virtual Polymers-2022), 08-09 December 2022, London, UK.
Md Enamul Hoque, Mirajul Alam Sarker, Md. Rubel Alam, Md. Kabir Hossain, Md. Abdul Gafur. Fabrication and characterization of CNT-integrated nanofibrous membrane for developing an antibacterial face mask. BCSIR Congress-2022, 01 – 03 Dec 2022, Dhaka, Bangladesh
Md Enamul Hoque (Invited Speaker), Md Rubel Alam. Face Mask Against COVID-19 – Roles, Requirements, Efficacy and Sustainability. Pathogens Research eConference (Pathogens-eCon2022), 30 November to 01 December 2022, Tokyo, Japan
C Balaji Ayyanar, K Marimuthu, B Gayathri, C Bharathiraj, Md Enamul Hoque (Invited Speaker). Characterization and In-vitro Investigation of Natural Plant Extracts Blended PVA Biomembrane for Wound-Dressing. International Online Conference on Nano Materials (ICN 2022), 12-14 August 2022, Kerala, India
Md Zillur Rahman, Md Enamul Hoque (Plenary Speaker), Md Rubel Alam, Md Abdur Rouf, Saiful Islam Khan, Huaizhong Xu, and Seeram Ramakrishna. Face Masks to Combat Coronavirus (COVID-19)—Processing, Roles, Requirements, Efficacy, Risk and Sustainability. 5th International Webinar on Chemistry and Pharmaceutic al Chemistry, 08-09 July 2022, Kington, United Kingdom
Md Enamul Hoque, Md Abdul Alim Shuvo, Shifat Al Hasnayeen Riham. Design and Development of a Cost-Effective Prosthetic Leg. 4th IEEE Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability 2022 (IEEE ECBIOS 2022), 27-29 May, 2022, Tainan, Taiwan.
Divya Pradip Roy, Md Zahirul Alam Chowdhury, Farhana Afrose, Md Enamul Hoque. Design and Development of a Cost-effective Prosthetic Hand for Upper Limb Amputees. 13th Biomedical Engineering International Conference (BMEiCON2021), 19-21 November 2021, Ayutthaya, Thailand.
Md Enamul Hoque (Invited Speaker). Hybrid scaffolds potential for the advanced patient-specific need of tissue engineering. 2nd Online International Conference on Materials Science and Nanomaterials, 13-14 August 2021, USA.
Md Enamul Hoque (Invited Speaker), Md Abu Saif Tahsin. Processing of Biomaterials Into 3D Tissue Engineering Scaffolds. International Conference on Polymer Science and Composite Materials, 05-07 July, 2021, Bucharest, Romania (Virtual).
Md Enamul Hoque (Keynote Speaker), Muhammad Ifaz Shahriar Chowdhury, Md Nazmul Huda. Advanced Technologies in Rapid Product Development. International Conference on Advanced Automotive and Mechanical Engineering (INCAAMS 2021), 2-3 July 2021, India (Virtual).
Md Enamul Hoque (Keynote Speaker), Mohammad Habibul Islam, Md Abu Saif Tahsin and Sk Laila Ayesha. Advances in biomaterials for various biomedical applications. International Conference on Science and Technology for Celebrating the Birth Centerary of Bangabandhu (ICSTB-2021), 11-13 March 2021, Dhaka, Bangladesh.
Farial Tasnim, Mohiuddin Ahmed Sajeeb and Md Enamul Hoque. Design and development of a low-cost trans-femoral prosthesis for the amputees of Bangladesh. International Conference on Science and Technology for Celebrating the Birth Centerary of Bangabandhu (ICSTB-2021), 11-13 March 2021, Dhaka, Bangladesh.
Pranta Ray, Jun Ma, Md Enamul Hoque, M Abdul Gafur. Synthesis and characterization of hydroxyapatite derived from cockle (Pila globosa) shell waste. International Conference on Science and Technology for Celebrating the Birth Centerary of Bangabandhu (ICSTB-2021), 11-13 March 2021, Dhaka, Bangladesh.
M. Enamul Hoque (Invited Speaker), Sk S M Tareq Aziz Shovon, Mansura Ahmed, Sumona Azad, Md Tareq Aziz, Sharjis Ibne Wadud. A Low-Cost Multichannel Prosthetic Hand: Design And Development. International Conference on Biomathematics and Modeling (ICBM-19), 31 August 2019, Guwahati, Assam, India.
M Enamul Hoque (Invited Speaker). 3D Hybrid Scaffold for Modern Regenerative Therapy - Towards Bioartificial Liver Support System. 2nd International Conference of Bangladesh Stem Cell & Regenerative Medicine Society, 04 November 2018, Dhaka, Bangladesh
Hoque M E (Keynote Speaker). Advanced Nanotechnology in Regenerative Therapy – Current Trends, Recent Developments and Future Prospects of Skin Regeneration. International workshop on Recent Advances in Nanotechnology and Applications (RANA-2018), 7-8 September 2018, AMET University, Chennai, India
Hoque M E (Invited Speaker), Wahab M A, Daei J M G, Chuan Y L. Vibrant 3D Scaffolds for Advanced Regenerative Therapy – An Emerging Technology. 3rd International Conference on Medical Physics in Radiation Oncology and Imaging (ICMPROI-2018), 10-12 March 2018, Dhaka, Bangladesh.
M. Enamul Hoque. Enhancement of mechanical property of gelatin nanofibers through optimization of electrospinning process parameters by response surface methodology (RSM). The 6th Annual World Congress of Molecular Medicine 2017, 25-27 September 2017, Xi’an, China
M. Enamul Hoque. Natural polymer nanofibers – An emerging nanomedicine towards efficient wound healing. International Conference on Emerging Technologies on Nanoelectronics And Nanomedicines (ETNEM – 2017), 11 August 2017, Chennai, India
Feven MM, Khalid M, Ratnam CT, Hoque ME. Advanced Nanohydroxyapatite Bioceramic Potentially for Bone Regeneration: Synthesis and Characterization. 210^th International Conference on Medical and Biosciences (210^th ICMBS), 16 - 17 July 2017, Zurich, Switzerland.
Anika Benozir Asha, Manzila Islam Tuheen, Mehedi Hasan, Md Enamul Hoque. Effects of Heat Treatment Temperature on the Formation and Stability of Na2Ca2Si3O9 Crystalline Phase: Advanced Bioactive Glass-Ceramic for Potential Tissue Engineering Application. 2^nd International Nanotechnology Conference and Expo (Nanotech-2017), 3-5 April 2017, Dubai, UAE.
M Enamul Hoque (Invited Speaker). Robust formulation of 3D scaffolds using various biopolymers via customised desktop robot based rapid prototyping system. 4^th International Conference on Nanomedicine and Tissue Engineering (ICNT 2016) 12-14 August 2016, Kottayam, Kerala, India.
M Enamul Hoque. Bio-technically vibrant chitosan based electrospun nanofibrous membrane for potential water filtration. International Nanotechnology Conference & Expo (Nanotech – 2016), 04 – 06 April 2016, Baltimore, USA.
M Enamul Hoque, Tan Wei Jin, Saied H. Mohamed, S M Atiqure Rahman. Conventional Dental Porcelain: Environmental Effects on Morphological and Mechanical Properties. World Congress on Dental Research (Dental-2015), 23 – 25 November 2015, Dubai, UAE.
F.M. Michael, M. Khalid, M.E. Hoque, C.T. Ratnam. PLA/GNP/NHA: Application of poly-lactic acid reinforced with graphene nano-platelets and nano-hydroxy apatite hybrids in load bearing bone implants. 5^th International Conference on Nanotek and Expo 2015, 16 – 18 November 2015, San Antonio, USA.
M.E. Hoque, T. Nuge, K.Y. Tshai, N. Nordin, R.G.S.V. Prasad. Bioactive electrospun nanofibrous matrix delivering growth factors for guided skin regeneration. The International Nanotech & NanoScience Conference and Exhibition (Nanotech France 2015), 15 – 17 June 2015, Paris, France.
M. Reza Ketabchi, M. Khalid, M. Enamul Hoque (Invited Speaker), C. T. Ratnam, W. Rashmi. Eco-friendly and Cost-effective Isolation of Cellulose Microfibres and Nano-Crystals from Kenaf Fibres. 13th International Conference on Environment, Ecosystems and Development (EED 2015), 23 – 25 April 2015, Kuala Lumpur, Malaysia.
M Enamul Hoque (Invited Speaker), Tamrin Nuge, Tshai Kim Yeow, Norshariza Nordin. Gelatin Nanofibrous Matrix: Characterization and Evaluation of Nanometal Release. World Congress and Expo on Nanotechnology and Materials Science, 13 – 15 April 2015, Dubai, UAE.
FM. Michael, M. Khalid, CT. Ratnam, ME. Hoque. Effect of Solvents on the Dispersion of Graphene Nanoplatelets in Nanohydroxyapatite for Load Bearing Body Implants. 2nd Edition Nanotech Dubai 2015 Conference & Exhibition (NANOTECH DUBAI 2015), 16 - 18 March 2015, Dubai, UAE.
M. Enamul Hoque (Keynote Speaker). Advanced Biomaterials (Biocomposites) in Biomedical Applications. Postgraduate Symposium on Technology Biocomposite 2015, 03 March 2015, Universiti Putra Malaysia, Kuala Lumpur, Malaysia.
A.H. Muhammad Ismail, M.S. Risby, A. Ali, S.M. Sapuan, M.E. Hoque. Flexural Strength and Fracture Toughness of Carbon Nanotubes (CNTs) Reinforced Epoxy Composites. International Conference on Science, Technology, Engineering and Management (ICSTEM – 2015), 3 January 2015, Singapore.
Ansari MNM, Begum S, Aini SS, Nainar SM, Ng MH and Ruszymah BHI, Hoque ME, Hazleen Anuar. PLA-HA Based Biocomposite for Bone Scaffold Application. BioTechnology Asia 2014, 19 - 21 November 2014, Kuala Lumpur, Malaysia.
M. Reza Ketabchi, M. Khalid Siddiqui, Ing Kong, M Enamul Hoque. Ecofriendly Isolation of Nano Crystalline Cellulose. Postgraduate Research Showcase, 23 September 2014, University of Nottingham Malaysia Campus, Selangor, Malaysia - Won Best Poster Award.
M Enamul Hoque, Tamrin Nuge, Tshai Kim Yeow, Norshariza Nordin. Nanometal Doped Gelatin Nanomatrix for Potential Antibacterial Wound Dressing. The Australian Biomedical Engineering Conference (ABEC 2014), 20 - 22 August 2014, Canberra, Australia.
M Enamul Hoque, Tan Wei Jin, Saied Hamd Mohamed, Moniruddin Chowdhury. Physical and Mechanical Characterization of Conventional Dental Porcelain: Study On Environmental Effects. 5th Malaysian Tissue Engineering & Regenerative Medicine Scientific Meeting (MTERMS 2014), 17 – 19 September 2014, Kuala Lumpur, Malaysia.
Feven MM, Khalid M, Hoque ME, Ratnam CT. Processing and Characterization of Nanohydroxyapatite using Ultrasonic Cavitation. 5th Malaysian Tissue Engineering & Regenerative Medicine Scientific Meeting (MTERMS 2014), 17 – 19 September 2014, Kuala Lumpur, Malaysia.
Sharen Aini S, Mohamed Nainar S, Shahida Begum, Ansari MNM, Vicki WV, Hoque ME, Ng MH and Ruszymah BHI. Biocompatibility Screening Of Biomaterials For Bone Tissue Engineering – Study Of The Osteogenic Cell Morphology And Attachment Behaviour In Vitro. 5th Malaysian Tissue Engineering & Regenerative Medicine Scientific Meeting (MTERMS 2014), 17 – 19 September 2014, Kuala Lumpur, Malaysia.
M. Enamul Hoque, H. Meng Teh. 3D Hybrid Scaffolds for Potential Biomedical Applications: Development and Characterization. The Australian Biomedical Engineering Conference (ABEC 2014), 20 - 22 August 2014, Canberra, Australia.
M Enamul Hoque (Invited Speaker), Tamrin Nuge, Tshai Kim Yeow, Norshariza Nordin, R.G.S.V. Prasad. Gelatin Electrospun Nanofibre Scaffold for Potential Wound Healing Application. 9th International Materials Technology Conference and Exhibition (IMTCE 2014), 13 – 16 May 2014, Kuala Lumpur, Malaysia.
J. W. Lee, M. J. Roe, M. E. Hoque, A. C. Spowage, C. A. Scotchford, D. M. Grant And P. D. Brown. Characterisation of silica-doped hydroxyapatite biomedical coatings on titanium for biomedical applications. 9th International Materials Technology Conference and Exhibition (IMTCE 2014), 13 – 16 May 2014, Kuala Lumpur, Malaysia.
K.Y. Tshai, H.J. Tan, P.S. Khiew, M Enamul Hoque. Flammability and Smoke Density of Kenaf and Oil-Palm Fibre Composites. 9th International Materials Technology Conference and Exhibition (IMTCE 2014), 13 – 16 May 2014, Kuala Lumpur, Malaysia.
Sivaruby Kanagaratanam, Sylvia Yui Swee Lian, Miskandar Mat Sahri, M. Enamul Hoque, Andrew Spowage. Palm oil-based solid fractions characterised based on dipalmitoyl-oleoyl-glycerol and tripalmitoyl-glycerol enhancement for food application. International Palm Oil Congress (PIPOC 2013), 19 - 22 November 2013, Kuala Lumpur, Malaysia.
Sivaruby Kanagaratnam, Miskandar Mat Sahri, M. Enamul Hoque and Andrew Spowage. Palm Oil Based Structural Fat in Reduced Saturated Fatty Acids Formulations, 105th AOCS Annual Meeting And Expo, 4 – 7 May 2014, Texas, USA.
M. Enamul Hoque (Plenary Speaker). Advancement in Tissue Engineering Scaffold Development: Rapid Prototyping Technology. 2nd International Conference & Exhibition on Materials Science & Engineering (Materials Science - 2013), 7 - 9 October 2013, Las Vegas, USA.
S. Mohamed Nainar, Shahida Begum, M. N. M. Ansari, V. W. Vicki, Md Enamul Hoque, Sharen Aini Binti Shamsuddin, Angela Ng Min Hwei, Ruszymah Idrus. Biocompatibility study of a novel PLA-HA based composites for bone tissue engineering applications. National Seminar on Biopolymers & Green Composites – Emerging Science and Technology (BPGC 2013), 27 September 2013.
Y. Leng Chuan, M. Enamul Hoque, Ian Pashby. Prediction of patient-pacific tissue engineering scaffolds for optimal design. 6th International Conference on Advanced Computer Theory and Engineering (ICACTE 2013), 17-18 August 2013, Malé, Maldives.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby, S. Sheren Aini, Angela Ng Min Hwei, Ruszymah Idrus. Cell Culture Efficacy of Hybrid and Single Design Tissue Engineering Scaffolds. The Annual International Conference on Science and Engineering in Biology, Medicine and Public Health (BioMedPub 2013), 16 – 17 August 2013, Jakarta, Indonesia.
M. Enamul Hoque (Invited Speaker). Novel Tissue Engineering Approach Towards the Development of Bioartificial Liver Assist Devices. Biomedical Engineering in Healthcare Conference 2013, 3 – 4 July 2013, Kuala Lumpur, Malaysia.
J. W. Lee, M.J.Roe, M. E. Hoque, A. C. Spowage, C. A. Scotchford, D. M. Grant and P. D. Brown. Characterisation of silica-doped hydroxyapatite biomedical coatings on titanium. 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9 – 12 July 2012, Kuala Lumpur, Malaysia.
Sivaruby Kanagaratanam, M. Enamul Hoque, Miskandar Mat Sahri, Andrew Spowage. The Ability of Palm Stearin as Structuring Agent in Food Formulations. 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9 – 12 July 2012, Kuala Lumpur, Malaysia.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby. Development of PCL-PEG Hybrid Tissue Engineering Scaffolds Using Extrusion Based Rapid Prototyping System. Malaysian Tissue Engineering and Regenerative Medicine Scientific Conference (MTERMS 2012), 3 – 4 June 2012, Langkawi, Malaysia.
J. W. Lee, M.J.Roe, M. E. Hoque, A. C. Spowage, C. A. Scotchford, D. M. Grant and P. D. Brown. Increasing the Lifespan of Human Joint Implants. Global Research Workshop, 23 – 27 April 2012. The University of Nottingham Malaysia Campus, Malaysia – Won the Best Poster Award.
Sivaruby Kanagaratanam, M. Enamul Hoque, Miskandar Mat Sahri, Andrew Spowage. Effect of temperature on oil binding capacity of palm-based shortening. National Food Seminar 2012, 6 – 7 March 2012, Melaka, Malaysia.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby. Single- and hybrid-design tissue engineering scaffolds: Investigation on accelerated in vitro degradation. 1st Biotechnology World Congress (1st BWC 2012), 14 - 15 Feb 2012, Dubai, UAE.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby. Design and Fabrication of Hybrid Tissue Engineering Scaffold for Regenerative Therapy. 3rd International Conference in Rural Medicine, 22 – 24 November 2011, Sabah, Malaysia.
Sivaruby Kanagaratanam, Miskandar Mat Sahri, M. Enamul Hoque and Andrew Spowage. Oil binding capacity of palm stearin with high percentage of liquid oil. International palm Oil Congress 2011, 15 - 17 November 2011, Kuala Lumpur, Malaysia.
M. Enamul Hoque (Invited Speaker), Vinayak Nambiar. Hydroxyapatite Bioceramic for Biomedical Applications: Synthesis and Characterization. 5th China Medical Biotech Forum (5th CMBF), 7 - 9 November, 2011, Beijing, China.
Sivaruby Kanagaratanam, Miskandar Mat Sahri, M. Enamul Hoque and Andrew Spowage. Plam Oil Solids. Palm Oil Familiarization Program, 24-28 October 2011, Johor Bahru, Malaysia.
M. Enamul Hoque (Invited Speaker), L. Pui Gee. Biomass to Bioenergy: Study on the Key Parameters of the Production of Biodiesel from Renewable Sources. Low Carbon Earth Summit-2011 (LCES-2011), 19 – 26 October 2011, Dalian, China.
J. W. Lee, M. E. Hoque, A. C. Spowage, C. A. Scotchford, D. M. Grant, P. D. Brown. Characterization of Biomaterial Coatings for Orthopedic Implants. Electron Microscopy and Analysis Group Conference (EMAG 2011), 6 - 9 September 2011, Birmingham, UK.
Md E. Hoque, Yong L. Chuan, Ian Pashby. Computational Modeling and Simulation on Degradation of 3D Tissue Engineering Scaffolds. 9th AES-ATEMA’2011 International Conference on Advances and Trends in Engineering Materials and their Applications, 01 - 05 August, 2011, Montreal, Canada.
M. E. Hoque, Y. L. Chuan, Ian Pashby, Angela Ng Min Hwei, Ruszymah Idrus. Process Optimization to Improve the Processing of Poly(DL-Lactide-co-Glycolide) into 3D Tissue Engineering Scaffolds. 5th Kuala Lumpur International Conference on Biomedical Engineering (Biomed 2011), 20 - 23 June 2011, Kuala Lumpur, Malaysia.
Sivaruby Kanagaratanam, Miskandar Mat Sahri, M. Enamul Hoque, Andrew Spowage. Determination of stability of blends with high percentage of liquid oils. 102^nd AOCS Annual Meeting and Expo,1 - 4 May 2011, Ohio, USA.
M. Enamul Hoque (Invited Speaker). Novel Biopolymers for Scaffold-Based Tissue Engineering Therapy: Towards the Optimization of Scaffold Design and Development. 3rd Annual Congress of Regenerative Medicine & Stem Cell 2010, 5-7 December 2010, Shanghai, China.
M. Enamul Hoque (Invited Speaker). Rapid Prototyping Technique – Today’s and Tomorrow’s Technology to Develop 3D Tissue Engineering Scaffold. 3rd MTERMS Scientific Meeting 2010, 13 - 14 October 2010, Kuala Lumpur, Malaysia.
M. Enamul Hoque, L. Festus Oguichen, Angela Ng, Ruszymah Idrus. Physical Model of a Dynamic Bioreactor Prototype for Skin Tissue Culture. 3^rd MTERMS Scientific Meeting 2010, 13 - 14 October 2010, Kuala Lumpur, Malaysia.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby. Modeling, Simulation and Optimization of 3D Tissue Engineering Scaffold. TERMIS-AP 2010 Annual Conference. 15 - 17 September 2010, Sydney, Australia.
M. Enamul Hoque, Y. Leng Chuan, Ian Pashby. Simulation on 3d tissue engineering scaffold: Influences of design parameters on porous and mechanical characteristics. World Engineering Congress 2010. 2–5 August 2010, Sarawak, Malaysia.
M. Enamul Hoque (Invited Speaker). Synthetic Biopolymers for Tissue Engineering Applications: 3D Scaffold and Rapid Prototyping Technology. 3rd World Congress of Industrial Biotechnology 2010. 25-27 July 2010, Dalian, China.
M. Enamul Hoque, Amrit Singh and Yong Leng Chuan. Biofuel from low cost feedstock - Waste to energy. World Bioenergy 2010. 25-27 May 2010, Jonkoping, Sweden.
M. Enamul Hoque, L. C. Yong, Y. J. Tan, K. Zaman, T. C. Yong. Development of Biodegradable Polymer: Effect of Cross-linked Trimethylolpropane Triacrylate and Electron Beam Irradiation. 2nd International Conference on Biomedical and Pharmaceutical Engineering. 2-4 December 2009, Singapore.
M. Enamul Hoque, J. Jonathan Netto, M.Y. Yusof, W.S. Wan Abdullah. Assessment of Corrosion Using Advance Laser Shearography. Malaysian Metallurgical Conference 2009, 1-2 December 2009, Perlis, Malaysia.
Sivaruby Kanagaratanam, Miskandar Mat Sahri, M. Enamul Hoque, Andrew Spowage. Reducing trans and saturated fatty acids in roll-in fats using palm oil fractions. International Palm Oil Congress 2009, 9 - 12 November 2009, Kuala Lumpur, Malaysia.
Sivaruby Kanagaratanam, Sylvia Yui Swee Lian, Miskandar Mat Sahri, M. Enamul Hoque, Andrew Spowage. Determination of stability and structural deformation of palm oil based shortening. International Palm Oil Congress 2009, 9 - 12 November 2009, Kuala Lumpur, Malaysia.
Sivaruby Kanagaratnam, Miskandar Mat Sahri, M. Enamul Hoque, Andrew Spowage. Optimizing Processing Technique in Margarine Production. 7th Euro Fed Lipid Congress 2009, 18 - 21 October 2009, Graz, Austria.
M. Enamul Hoque, D. Wijewardena, S. Mei Tan, S. M. Fadhlan, Angela Ng, Ruszymah Idrus. Design of an Incubator-Suited Bioreactor for Dynamic Tissue Culture – A Prototype. 2nd Tissue Engineering and Regenerative Medicine International Society (TERMIS) World Congress. 31 August – 3 September, 2009. Seoul, Korea.
M. Enamul Hoque, L. Pui Gee. Production of Biodiesel from Plant Resources. The 3rd Regional Conference on Natural Resources in the Tropics (Nrtrop3). 3 – 5 August 2009, Sarawak, Malaysia.
M. Enamul Hoque. Biotechnological Extraction of Heavy Metals from Secondary Sources. Materials, Minerals and Mining Conference (M3C 2009), 7 April 2009, Kuala Lumpur, Malaysia.
M. Enamul Hoque, J. Philip OBBARD. Eco-friendly recovery of heavy metals from alternative sources using microorganisms - A review. International Conference on Environment 2008 (ICENV 2008), 15-17 December 2008, Penang, Malaysia.
W.S. Wan Abdullah, M.Y. Yusof, A.N. Ahmad Puad, M. E. Hoque. Potential Application of Laser Shearography for Analysis of Corrosion in Petroleum Pipeline. International Conference on Experimental Mechanics 2008 (ICEM 2008), 8-11 November 2008, Nanjing, China.
M. Enamul Hoque, L Weng Lum. A computational model to predict the effects of design parameters on porous and mechanical characteristics of 3d scaffolds. 2008 Annual Conference of Tissue Engineering and Regenerative Medicine International Society - Asian Pacific Region (2008 TERMIS-AP), November 6-8, 2008, Taipei, Taiwan.
M. Enamul Hoque. Strategic study on 3D scaffolds – From fabrication to in vitro experimentations. 6th Marie Curie Cutting-Edge Conference on “Stem Cells: From the Petri dish to the clinical application", 27 - 31st October 2008, Algarve, Portugal.
Hoque, M. E., Zainal, N. H., Syarif J. Investigation on mechanical properties of contemporary metallic bone plates – Towards the development of composite bone plates. 2nd Malaysian Tissue Engineering & Regenerative Medicine Scientific Meeting (2nd MTERMS 08), 22-23 July 2008, Kuala Lumpur, Malaysia.
M. Enamul Hoque, W. Feng, Y.S. Wong, D.W. Hutmacher, S. Li, M-H Huang, M.Vert. In vitro physical and mechano-chemical properties of biodegradable scaffolds fabricated with PCL and PCL-PEG. The 4th Kuala Lumpur International Conference on Biomedical Engineering (Biomed 2008), 25 - 28 June 2008, Kuala Lumpur, Malaysia.
M. Enamul Hoque, W. Feng, Y.S. Wong, D.W. Hutmacher, S. Li, M-H Huang, M.Vert, P.J. Bártolo. Scaffolds Designed and Fabricated with Elastic Biomaterials Applying CAD-CAM Technique. Tissue Engineering and Regenerative Medicine International Society – Europe Annual Meeting 2008 (TERMIS-EU 2008), 22 - 26 June 2008, Portugal.
Hoque M. E., Wong Y. S., Li S., Huang M. H., Vert M., Hutmacher D. W. Structural anisotropy and viscoelastic properties of scaffolds fabricated with PCL and PCL-PEG. Tissue Engineering and Regenerative Medicine International Society – Asia Pacific (TERMIS-AP 2007) Annual Meeting, 3 - 5 December 2007, Tokyo, Japan.
M. Enamul Hoque, Wong Y.S., Feng Wei, Li Suming, Huang Ming-Hsi, M. Vert. Hutmacher, D. W. Accelerated Degradation of 3-D Scaffolds Fabricated with Various Architectures Using Various Biopolymers via Rapid Prototyping Technology. 5th World Congress of Biomechanics, 29 July – 4 August 2006, Munich, Germany.
M. Enamul Hoque, D.W. Hutmacher, W. Feng, S. Li, M-H Huang, M.Vert, Y.S. Wong. Cell Behavior in Highly Reproducible and Fully Interconnected PCL-PEG-PCL Scaffolds. Regenerate World Congress on Tissue Engineering and Regenerative Medicine, 25 – 27 April 2006, Pittsburgh, Pennsylvania, USA.
M. Enamul Hoque, Hutmacher Dietmar W, Feng Wei, S. Li, M-H Huang, M.Vert, Wong Y S. Influence of process parameters on the properties of scaffolds developed by robot-based rapid prototyping (RP) technique. The 2nd Materials Research Society of Singapore (MRS-S) Conference on Advanced Materials, 18 – 20 January 2006, Singapore.
M. Enamul Hoque, Hutmacher Dietmar W, Feng Wei, S. Li, M-H Huang, M.Vert, Wong Y S. Desktop Robotic System to Process Synthetic Biopolymers into 3-D Scaffolds. The 3rd International Conference on Computational Intelligence, Robotics and Autonomous Systems (CIRAS 2005), 13 - 16 December 2005, Singapore.
M. Enamul Hoque, Hutmacher Dietmar W, Feng Wei, S. Li, M-H Huang, M.Vert, Wong Y S. Characterization of Scaffolds – Evaluation of the Effect of Material, Scaffold Architecture and Test Environment on Mechanical Properties. The 8th Annual Meeting of the Tissue Engineering Society International (TESI), 22-25 October 2005, Shanghai, China.
M. Enamul Hoque, Feng Wei, Wong YS, Hutmacher Dietmar W. Study on Structural Anisotropy of Scaffolds Developed by Solid Free Form Fabrication Technique. Regenerate 2005, 1-3 June 2005, Atlanta, Georgia, USA.
Hoque Md Enamul, Feng Wei, Li Suming, Huang Ming-his, Wong Y S, Hutmacher D W. Scaffold Fabrication Using a Rapid Prototyping Technique Based on Desktop-Robot-Controlled Melt Extrusion. Regenerate 2004, 9-12 June 2004, Washington, USA.
M. Enamul Hoque, W. Feng, L. Geng, Y.S. Wong, D.W. Hutmacher. 3d Polymeric Tissue Engineering Scaffolds Fabricated by a Robotic System. The 6th Asia Pacific Chitin-Chitosan Symposium (6APCCS), 23 - 26 May 2004, National University of Singapore, Singapore.
M. Enamul Hoque, Hai-Quan Mao, S. Ramakrishna. Synthetic Polymeric Scaffold for Bioartificial Liver Assist Device. The 2^nd International Conference on Structure, Processing and Properties of Materials, SPPM 2004, 25-27 February 2004, Dhaka, Bangladesh.
M. Enamul Hoque, Y. S. Wong and D. W. Hutmacher. Computer Controlled Melt Extrusion Technique for Fabricating Thermoplastic Polymeric Scaffold for Tissue Engineering Applications. International Conference on Materials for Advanced Technologies (ICMAT 2003), 7 – 12 December 2003, Singapore.
M. E. Hoque, P. C. Zhang, H. F. Lu, C. Yin, H. Q. Mao and S. Ramakrishna. Development of a Hybrid Fibrous Scaffold for Bioartificial Liver Assist Device. International Conference on Materials for Advanced Technologies (ICMAT) 2003, 7 – 12 December 2003, Singapore.
M. Enamul Hoque, Hai-Quan Mao and S. Ramakrishna. Development of Scaffold for Liver Tissue Engineering. International Conference on Manufacturing ICM 2002, 09 – 11 August 2002, Dhaka, Bangladesh.

SUBJECTS/COURSES TAUGHT

Theory

Sessional

Biofluid Mechanics and Heat Transfer

Professional Ethics

Biomedical Transport Fundamentals

Hospital Planning, Design, and Management

Biomaterials

Biomechanics

Motion Analysis and Rehabilitation Engineering

Biomedical Implants & Braces

Tissue Engineering

Biofluid Mechanics and Heat Transfer

Introduction to CAD in BME

Motion Analysis and Rehabilitation Engineering

Biomedical Implants & Braces

FIND MORE DETAILS IN: COMPLETE CV

MIST Applications

Academic Apps

Important Apps

Other Apps

Help & Support

Department of Biomedical Engineering (BME)

Dr Md. Enamul Hoque, Ph.D

PUBLICATIONS

Journal Papers (Total 139; 118 Published + 21 Under Review):

Books: 14 Published + 4 Under Review

Chapters in Books: Total 108 (91 Published + 17 Under Review)

Conference Proceedings/Presentations: (Total 102):

Dr Md. Enamul Hoque, Ph.D