MIST Applications

Academic Apps

Important Apps

Other Apps

Help & Support

Department of Mechanical Engineering (ME)

Dr. Md Sayem Hossain Bhuiyan

Associate Professor, Department of Mechanical Engineering (ME)

ACADEMIC QUALIFICATIONS:
 

Ph.D. in Mechanical Engineering

University of Malaya, Malaysia

 

M.Eng.Sc. in Engineering Design and Manufacture

University of Malaya, Malaysia

 

B.Sc. in Mechanical Engineering

Chittagong University of Engineering & Technology, Bangladesh

 

COURSES CONDUCTED:


Mechatronics, Automatic Control, Engineering Multiphase flow, IC Engine, Advanced Semiconductor Manufacturing Technology, Design for Manufacturing, Applied Mechanics, Machine Design, Strength of Material, Production Management, Engineering Management, Project Management, Engineering Economy

 

RESEARCH INTEREST:


Control, Automation and Robotics, Machining, Tool Condition Monitoring (TCM), Sensor based TCM, Applied Mechanics, Biomechanics, Prosthesis Construction

 

PUBLICATIONS:
 

Journal papers:

 

  • Li, T.P.,  Bhuiyan, M.S.H. (2020) Ankle joint rotator prototype designed for creating different angle of rotation at ankle joint in performing various daily activities. IOP Conf. Series: Materials Science and Engineering 920, 012002. doi:10.1088/1757-899X/920/1/012002

 

  • Bhuiyan, M. S. H. (2019) Minimization of Cutting Force by Optimizing the Cutting Parameters Using Taguchi Method in Turning. IOP Conference Series: Materials Science and Engineering, 530, 012006. doi: 10.1088/1757-899x/530/1/012006

 

  • Bhuiyan M.S.H., Choudhury I.A., Dahari M., Nukman Y., Dawal S.Z. (2017) An investigation into a gear based knee joint designed for lower limb prosthesis. Applied Bionics and Biomechanics, 2017, 1-14.

 

  • Bhuiyan, M. S. H., Choudhury, I. A., Dahari, M. and Nukman, Y. (2016) An investigation into turning of ASSAB-705 steel using multiple sensors. Materials and Manufacturing Processes. 31:7, 896-904.

 

  • Bhuiyan M.S.H., Choudhury I.A., Dahari M., Nukman Y., Dawal S.Z. (2016) Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring. Measurement, 92, 208-217.

 

  • Bhuiyan, M. S. H., Choudhury, I. A. and Dahari, M. (2015) Development of a Control System for Artificially Rehabilitated Limb: A Review. Biological Cybernetics. 109(2):141-62.

 

  • Bhuiyan, M. S. H., and Choudhury, I. A. (2015) Investigation of Tool Wear and Surface Finish by Analyzing Vibration Signals in Turning Assab-705 Steel. Journal of Machining science and Technology. 19 (2), 236-261.

 

  • Bhuiyan, M. S. H., Choudhury, I. A. and Dahari, M. (2014). Monitoring the tool wear, surface roughness and chip formation occurrences using multiple sensors in turning. Journal of Manufacturing Systems, 33 (4), 476–487.

 

  • Bhuiyan, M.S.H., Choudhury, I.A., & Nukman, Y. (2012). An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning. International Journal of Machine Tools and Manufacture, 58(1), 19-28.

 

  • Md. Sayem Hossain Bhuiyan, Imtiaz Ahmed Choudhury and Nukman Yusoff (2012). A new approach to investigate tool condition using dummy tool holder and sensor setup. The International Journal of Advanced Manufacturing Technology, 61(5-8), 465- 479.

 

  • Robertson, T.R., Bhuiyan, M.S.H., Hamza, M.F. (2019) Paper Products: Food Packages. Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.09809-X

 

  • Small, J.C., Poulos, H.G., Bhuiyan, M.S.H. (2019) Structural Integrity Issues Associated with Soils and Rock in Civil Engineering Industries. Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.11221-4

 

  • Robertson, T.R., Bhuiyan, M.S.H., Hamza, M.F. (2019) Paper Products: Food Packages. Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.09809-X

 

  • Wenk, H.R, Bhuiyan, M.S.H. (2018) The Texture of Rocks in the Earth's Deep Interior. Part II - Application of Texturing to the Deep Earth. Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.10528-4

 

  • Ajuong, E., Pinion, L.C., Bhuiyan, M.S.H. (2018) Degradation of Wood. Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier. doi.org/10.1016/B978-0-12-803581-8.10537-5

 

  • Martin, R.H., Bhuiyan, M.S.H. (2018) Degradation of Polymer Matrix Composites. Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.11222-6

 

  • Bhuiyan M.S.H., Nesic S., Sun W. (2017) Corrosion in Acid Gas Solutions, In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.10476-X

 

  • Bhuiyan M.S.H., and Conner A.H. (2017) Wood: Adhesives. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.01932-9.

 

  • Bhuiyan M.S.H., Bierwagen G.P., and Huovinen A.M. (2017) Paint Formulation. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.10253-X

 

  • Bhuiyan M.S.H., and Rawski, D.P. (2017) Pulp and Paper: Nonfibrous Components. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.10289-9

 

  • Richardson, J.A., and Bhuiyan, M.S.H. (2017) Corrosion in Hydrogen Halides and Hydrohalic Acids. Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.10372-8

 

  • Nukman, Y., Awais Farooqi, Osama Al-Sultan, Abdul Rahman A.Alnasser, Bhuiyan, M.S.H. (2017) A Strategic Development of Green Manufacturing Index (GMI) Topology Concerning the Environmental Impacts, Procedia Engineering 184: 370 – 380

 

  • Bhuiyan M.S.H., and Degischer H.P. (2016) Metal Matrix Composites, Recycling of. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.03648-1

 

  • Bhuiyan M.S.H. (2016) Wood: Nonstructural Panels. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.02221-9

 

  • Blankenhorn P.R., and Bhuiyan M.S.H. (2016) Wood: Sawn Materials. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.02223-2

 

  • Boehner A.W., and Bhuiyan M.S.H. (2016) Wood: Structural Panel Processes. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.02224-4

 

  • Fleming S., and Bhuiyan M.S.H. (2016) Art Forgeries: Scientific Detection. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.02227-X

 

  • Bhuiyan M.S.H., and Aitken M.J. (2016) Dating Archeological Materials. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.02229-3

 

  • Bhuiyan M.S.H., and Kramer D.L. (2016) Gels for Photographic Emulsions. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.02230-X

 

  • Bhuiyan M.S.H., and Sunderland P. (2016) Polymer Matrix Composites, Recycling of. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.03649-3

 

  • Bhuiyan M.S.H., and Clark J.P. (2016) Recycling of Materials: Economics. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.03650-X

 

  • Bhuiyan M.S.H., and Auty K.G.U. Wijayantha D.H. (2016) Twin Cell Technology for Hydrogen Generation. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.02241-4

 

  • Bhuiyan M.S.H., and Maternaghan T.J. (2016) Photographic Materials. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.02235-9

 

  • Bhuiyan M.S.H., and Mayne J.E.O. (2016) Mechanisms of Protection by Paints. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; doi.org/10.1016/B978-0-12-803581-8.10069-4

 

  • Bhuiyan M.S.H. A review on Limb Defects and Rehabilitation Methods. International Journal of Integrated Engineering (Under Review).

 

  • Bhuiyan M.S.H., Choudhury I.A., Dahari M. An investigation into a spring based ankle joint designed for lower limb prosthesis. Bionic Engineering (Under review).

 

  • Bhuiyan M.S.H., Choudhury I.A., Dahari M. Stability Performance evaluation of a newly designed above knee prosthesis for a one-sided tranfemoral amputee. Journal of Medical Engineering and Physics (Under review).

 

  • Bhuiyan M.S.H., Lawal S.A, Abutu J. A review of parameter optimization of machining processes. Machining Science and Technology (Submitted)

 

  • Hobbi S., Ataee A.A., Bhuiyan M.S.H. Multi-objective optimization of critical load and weight of composite shaft with elastic core under torsional loading. Acta Mechanica (Submitted)

 

Conference proceedings:

  • Li, T.P.,  Bhuiyan, M.S.H. (2019) Ankle joint rotator prototype designed for creating different angle of rotation at ankle joint in performing various daily activities. 6th International Conference of Global Network for Innovative Technology, Park Royal Hotel, Penang, Malaysia.

 

  • Bhuiyan, M. S. H. (2018) Minimization of cutting force by optimizing the cutting parameters using Taguchi method in turning. International Conference on Recent Advances in Industrial Engineering and Manufacturing (ICRAIEM 2018) Penang, Malaysia.

 

  • Bhuiyan, M. S. H. and Nukman, Y. (2016) A study on advancement in Sensor based Tool Condition Monitoring in Machining. International Conference on Mechanical, Materials and Manufacturing Systems (ICMMMS 16), SAIRAM Engineering College, Department of Mechanical Engineering, Tamil Nadu, India.

 

  • Bhuiyan, M. S. H., Choudhury, I. A. and Nukman, Y. (2012) Tool condition monitoring using acoustic emission and vibration signature in turning. International Conference of Manufacturing Engineering and Engineering Management, London, U.K.

 

  • Choudhury, I. A., Lee, C. Y., Bhuiyan, M. S. H.,. and Nukman, Y. (2010) Tool condition monitoring using AE signal in turning of ASSAB-705 steel. Paper presented at the World Engineering Congress 2010, Conference on Engineering and Technology Education. Kuching, Sarawak, Malaysia.

 

  • Bhuiyan, M. S. H., Choudhury, I. A. and Nukman, Y. (2010) Application of fusion sensing technique in tool condition Monitoring. Paper presented at The 11th Asia Pacific Industrial Engineering and Management Systems Conference, Melaka, Malaysia.

 

Book Chapter:

  • Choudhury, I. A., Hossain, A., Bhuiyan, M. S. H. Issues of Connectivity, Durability and Reliability of Sensors and its Application. Elsevier, 2014; Chapter No 01320, Vol. 13, pp 121–148, ISBN: 9780080965321.

 

  • Bhuiyan, M. S. H. and Choudhury, I. A. A Review on Tool Condition Monitoring using Sensor in Machining. Elsevier, 2014; Chapter No 01330, Vol. 13, pp 539–569, ISBN: 9780080965321.  

 

Scientific Book:

  • Md. Sayem Hossain Bhuiyan. Tool Condition Monitoring with Multiple Sensors. LAP LAMBERT Academic Publishing, 2016; ISBN: 978-3-330-01079-6.

 

 

 

 

 

TEACHING EXPERIENCE:

 

  • Organization: University of Science Malaysia (USM), Malaysia

Position        : Senior Lecturer/Assistant Professor

 

  • Organization: Asia Pacific Innovation Management Sdn. Bhd., Malaysia

Position        : Part-time lecturer

 

  • Organization: Elsevier Limited, Kidlington, Oxford, OX5 1GB United

Kingdom.

Position        : Review Editor (Reference Module in Material Sciences and

Materials Engineering)

 

  • Organization: Dept. of Mechanical Engineering, Faculty of Engineering,

University of Malaya, 50603-Kuala Lumpur, Malaysia.

Position        : Research Assistant

 

  • Organization: Dept. of Engineering Design and Manufacture, and Dept. of

Chemical Engineering, Faculty of Engineering, University of Malaya, 50603-Kuala Lumpur, Malaysia.

Position        : Tutor

 

  • Organization: Proton Holdings Bhd., Shah Alam, Malaysia

Position        :  Trainer

 

 

 

Dr. Md Sayem Hossain Bhuiyan

Associate Professor Department of Mechanical Engineering (ME) sayem@me.mist.ac.bd